1990-2001 Acura Integra Steering Angle Sensor Torque Specs

1.8L I4

Applies to 1990, 1991, 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000, and 2001 Acura Integra

Labor Time:1 hours

Torque Values (8 specifications)

Component	Nm	lb-ft	Notes
Cover Screws	10	8	—
Mounting Bolts	26	19	—
⚠️ Power Steering Line Fittings	30	22	Use new O-rings \| ⚠️ VERIFY SEQUENCE WITH SERVICE MANUAL
⚠️ Rack Bolts	97	71	—
⚠️ Steering Rack Bolts	100	74	⚠️ VERIFY SEQUENCE WITH SERVICE MANUAL
⚠️ Tie Rod End Castle Nut	55	41	Use new cotter pin \| ⚠️ VERIFY SEQUENCE WITH SERVICE MANUAL
⚠️ Tie Rod Nut	52	38	—
⚠️ Wheel Lug Nuts	129	95	—

The primary torque specification for steering angle sensor on a 1990-2001 Acura Integra is 10 Nm (8 lb-ft).

There are 8 torque specifications for steering angle sensor on the 1990-2001 Acura Integra 1.8L I4, covering all related fasteners and components.