P1447high severityPowertrain
VANOS Supply Voltage Low
on 2007 BMW 325i 3.0L I6 N52 · RWD
What this code means
The DME detected that the supply voltage to the VANOS (Variable Nockenwellen Steuerung) solenoid system is below the minimum threshold. VANOS controls variable valve timing on BMW engines and requires stable voltage for precise operation.
Symptoms
- Check Engine Light
- Rough idle
- Loss of power at low RPM
- VANOS rattle on startup
- Poor fuel economy
Common causes
- Low battery voltage
- Faulty voltage regulator
- High-resistance connection in VANOS power supply
- Corroded VANOS solenoid connector
- Failing alternator
Diagnostic steps
- Test battery voltage under load
- Check alternator output
- Measure voltage at VANOS solenoid connector
- Inspect wiring for high resistance
- Check ground connections
Repair notes
Repair the low-voltage condition by addressing the battery, alternator, or wiring fault.
Other Powertrain codes on this vehicle
P0001
Fuel Volume Regulator Control Circuit/Open
P0002
Fuel Volume Regulator Control Circuit Range/Performance
P0003
Fuel Volume Regulator Control Circuit Low
P0004
Fuel Volume Regulator Control Circuit High
P0010
Intake Camshaft Position Actuator Circuit/Open Bank 1
P0011
Intake Camshaft Position Timing Over-Advanced Bank 1
P0012
Intake Camshaft Position Timing Over-Retarded Bank 1
P0013
Exhaust Camshaft Position Actuator Circuit/Open Bank 1
P0014
Exhaust Camshaft Position Timing Over-Advanced Bank 1
P0015
Exhaust Camshaft Position Timing Over-Retarded Bank 1