P3000moderate severityPowertrain
Turbo/Supercharger Boost Control Module Performance
on 2016 Fiat Uno 1.4L I4 Flex Fire Evo · FWD
What this code means
The PCM detected the turbo/supercharger boost control module is not responding correctly to commanded boost levels. The module regulates wastegate or bypass valve position to control boost pressure.
Symptoms
- Check Engine Light
- Reduced boost pressure
- Loss of power under acceleration
- Turbo lag increased
- Poor fuel economy
Common causes
- Faulty boost control module
- Wastegate actuator failure
- Vacuum/pressure line leak
- Corroded module connector
- PCM communication error
Diagnostic steps
- Read freeze frame data and boost PIDs
- Command boost control module through scan tool
- Inspect vacuum and pressure lines to wastegate
- Check boost control module connector and wiring
- Measure actual vs commanded boost pressure
Repair notes
Replace boost control module or repair wiring. Verify wastegate actuator operation after repair.
Other Powertrain codes on this vehicle
P0001
Fuel Volume Regulator Control Circuit/Open
P0002
Fuel Volume Regulator Control Circuit Range/Performance
P0003
Fuel Volume Regulator Control Circuit Low
P0004
Fuel Volume Regulator Control Circuit High
P0010
Intake Camshaft Position Actuator Circuit/Open Bank 1
P0011
Intake Camshaft Position Timing Over-Advanced Bank 1
P0012
Intake Camshaft Position Timing Over-Retarded Bank 1
P0013
Exhaust Camshaft Position Actuator Circuit/Open Bank 1
P0014
Exhaust Camshaft Position Timing Over-Advanced Bank 1
P0015
Exhaust Camshaft Position Timing Over-Retarded Bank 1