P1637high severityPowertrain
CAN Link ECM/ABS Circuit Fault
on 2018 Ford Transit 3.7L V6 · RWD
What this code means
The Controller Area Network (CAN) communication link between the Engine Control Module and the ABS module has a fault. The modules cannot exchange data properly.
Symptoms
- Check Engine Light
- ABS warning light
- Traction control disabled
- Possible limp mode
Common causes
- Damaged CAN bus wiring
- Faulty ABS module
- Faulty PCM
- Corroded CAN connector
- CAN bus termination issue
Diagnostic steps
- Check for ABS DTCs as well
- Inspect CAN bus wiring for damage
- Test CAN bus resistance (should be ~60 ohms between CAN-H and CAN-L)
- Check connectors at PCM and ABS module
Repair notes
Repair CAN bus wiring. Replace faulty module if communication is lost.
Other Powertrain codes on this vehicle
P0001
Fuel Volume Regulator Control Circuit/Open
P0002
Fuel Volume Regulator Control Circuit Range/Performance
P0003
Fuel Volume Regulator Control Circuit Low
P0004
Fuel Volume Regulator Control Circuit High
P0010
Intake Camshaft Position Actuator Circuit/Open Bank 1
P0011
Intake Camshaft Position Timing Over-Advanced Bank 1
P0012
Intake Camshaft Position Timing Over-Retarded Bank 1
P0013
Exhaust Camshaft Position Actuator Circuit/Open Bank 1
P0014
Exhaust Camshaft Position Timing Over-Advanced Bank 1
P0015
Exhaust Camshaft Position Timing Over-Retarded Bank 1