P2104critical severityPowertrain
Throttle Actuator Control System Forced Idle
on 2011 Mitsubishi Lancer 2.4L I4 · FWD
What this code means
ECM has forced the engine to idle speed only due to a detected throttle control fault.
Symptoms
- Engine stuck at idle
- Check engine light
- Vehicle barely moves
- Traction control light on
Common causes
- Throttle body failure
- APP sensor fault
- Wiring issue
- ECM detected conflicting throttle signals
Diagnostic steps
- Scan for other DTCs
- Check APP sensor signals
- Inspect throttle body
- Clear codes and test
Repair notes
Diagnose root cause from accompanying DTCs. This is a protective measure.
Other Powertrain codes on this vehicle
P0001
Fuel Volume Regulator Control Circuit/Open
P0002
Fuel Volume Regulator Control Circuit Range/Performance
P0003
Fuel Volume Regulator Control Circuit Low
P0004
Fuel Volume Regulator Control Circuit High
P0010
Intake Camshaft Position Actuator Circuit/Open Bank 1
P0011
Intake Camshaft Position Timing Over-Advanced Bank 1
P0012
Intake Camshaft Position Timing Over-Retarded Bank 1
P0013
Exhaust Camshaft Position Actuator Circuit/Open Bank 1
P0014
Exhaust Camshaft Position Timing Over-Advanced Bank 1
P0015
Exhaust Camshaft Position Timing Over-Retarded Bank 1