Initial Setup Not Complete
1998-2008 Volkswagen Pointer 1.8L I4 🇦🇺
Description
The vehicle or module initial setup procedure has not been completed. Required after major module replacement.
Symptoms
- Multiple systems in limited mode
- Features not available
- Setup reminder messages
- Module self-tests not passed
Common Causes
- Post-replacement setup not done
- Battery disconnect reset setup flags
- Module replacement without completing setup
- Programming interrupted during setup
Diagnostic Steps
- Run complete vehicle setup procedure
- Perform module initialization sequence
- Complete all post-replacement steps per service manual
- Verify each system completes self-test
Repair Notes
Complete the full post-service initialization procedure per manufacturer service manual.
Related Codes
Other Network Codes
- U0001High Speed CAN Communication Bus
- U0002High Speed CAN Communication Bus Performance
- U0003High Speed CAN Communication Bus (+) Open
- U0004High Speed CAN Communication Bus (+) Low
- U0005High Speed CAN Communication Bus (+) High
- U0006High Speed CAN Communication Bus (-) Open
- U0007High Speed CAN Communication Bus (-) Low
- U0008High Speed CAN Communication Bus (-) High
- U0009High Speed CAN Communication Bus Shorted Together
- U0010Medium Speed CAN Communication Bus
U2100 on Other Vehicles
Volkswagen Amarok BR
2010-2025 2.0L I4 TDI Diesel
Volkswagen Amarok BR
2018-2025 3.0L V6 TDI Diesel
Volkswagen Arteon
2019-2024 2.0L Turbo I4
Volkswagen Atlas
2018-2024 2.0L Turbo I4
Volkswagen Atlas
2018-2024 3.6L V6
Volkswagen Atlas Cross Sport
2020-2024 2.0L Turbo I4
Volkswagen Atlas Cross Sport
2020-2024 3.6L V6
Volkswagen Beetle
2012-2019 2.0L Turbo I4
Common Questions
What does code U2100 mean on a 1998-2008 Volkswagen Pointer?
U2100 stands for "Initial Setup Not Complete". The vehicle or module initial setup procedure has not been completed. Required after major module replacement.
What are the symptoms of U2100 on a Volkswagen Pointer?
Common symptoms of U2100 include: Multiple systems in limited mode, Features not available, Setup reminder messages, Module self-tests not passed.
What causes U2100 on a 1998-2008 Volkswagen Pointer?
Common causes of U2100 include: Post-replacement setup not done, Battery disconnect reset setup flags, Module replacement without completing setup, Programming interrupted during setup.