1994 ROLLS-ROYCE CORNICHE

Typical onset: 70,000-110,000 mi

Symptoms: Car sits unevenly or drops overnight, Harsh ride quality, Warning lights on dash, Compressor runs constantly

Fix: The self-leveling hydraulic system uses accumulators, height sensors, and rubber flex hoses that age out. Accumulators fail first (3-4 units), then hoses crack and leak fluid. Full system overhaul includes all accumulators, hoses, and fluid flush—12-16 hours labor if you replace everything proactively.

Estimated cost: $4,500-7,500

Typical onset: 60,000-100,000 mi

Symptoms: Transmission fluid puddles under car, Delayed or harsh shifts, Overheating during summer driving, Burnt ATF smell

Fix: The external oil cooler lines corrode and the shift solenoid block develops internal leaks. Cooler line replacement is 3-4 hours; solenoid block replacement requires pan drop and valve body removal, add another 5-6 hours. Always replace the transmission mount simultaneously—it's oil-soaked and deteriorated.

Estimated cost: $2,200-3,800

Typical onset: 100,000-140,000 mi

Symptoms: Heavy knocking on cold start, Low oil pressure at idle when hot, Metal flakes in oil, Excessive blowby and oil consumption

Fix: The long-stroke V8 eventually wears main bearings and piston rings, especially if oil changes were stretched. A proper engine-out rebuild includes new pistons, rings, bearings, timing components, and machine work—60-80 hours labor. Short block replacement is faster (35-45 hours) but costs nearly the same due to the $12k+ short block price from specialists.

Estimated cost: $18,000-28,000

Typical onset: any mileage, age-related

Symptoms: ABS warning light illuminated, Rock-hard brake pedal, Pump runs for 30+ seconds on startup, Loss of power assist

Fix: The Teves ABS modulator and hydraulic brake accumulator sphere are NLA from Rolls; require sourcing rebuilt units or aftermarket conversions. Modulator replacement is 6-8 hours, accumulator alone is 3-4 hours. Many owners convert to non-ABS master cylinder setup to avoid recurring failures—less safe but functional.

Estimated cost: $3,500-6,000

Symptoms: Top won't raise or lower, Uneven operation, one side stalls, Hydraulic fluid leaks in trunk, Motor runs but no movement

Fix: The German-made top mechanism uses two hydraulic rams and a dedicated pump. Seals dry out from non-use; rams seize or leak. Cylinder rebuilds are 4-6 hours each side, pump replacement adds 2-3 hours. Preventive exercise (cycle monthly) extends life considerably.

Estimated cost: $2,800-4,200

Typical onset: any mileage, storage-related

Symptoms: Hard starting after sitting, Rough idle and stumbling, Stalling when hot, Poor throttle response

Fix: Ethanol fuel and infrequent use cause varnish buildup in the K-Jetronic fuel distributor and injectors. In-tank pump pre-filter clogs first. Full service includes tank drop, pump/filter replacement, injector ultrasonic cleaning, and distributor rebuild—10-14 hours. Use non-ethanol fuel and add stabilizer if driven less than monthly.

Estimated cost: $2,000-3,200