2017-2020 Tesla Model 3 Front Main Seal Torque Specs

Standard Range Plus Single Motor RWD

Applies to 2017, 2018, 2019, and 2020 Tesla Model 3

Labor Time:8 hours

Torque Values (13 specifications)

Component	Nm	lb-ft	Notes
Cover Bolts	16	12	—
⚠️ Crankshaft Pulley Bolt	180	133	Often TTY - check spec, may require impact
Electrical Connector Bolts	7	5	—
⚠️ Gasket Bolts	20	15	—
⚠️ Gasket Surface Bolts	20	15	Clean mating surfaces
⚠️ Harmonic Balancer Bolt	180	133	Often TTY, may need impact
⚠️ Mounting Bolts	47	35	—
⚠️ Oil Drain Plug	35	26	Use new crush washer
Oil Pan Bolts	12	9	Front section only
Sensor Bolts	11	8	—
Sensor Mounting Bolts	11	8	—
⚠️ Timing Cover Bolts - 10mm	45	33	Tighten in sequence
⚠️ Timing Cover Bolts - 8mm	25	18	Tighten in sequence

Other Jobs with Torque Specs

Common Questions

What is the torque spec for front main seal on a 2017-2020 Tesla Model 3?

The primary torque specification for front main seal on a 2017-2020 Tesla Model 3 is 16 Nm (12 lb-ft).

How many torque specs are there for Tesla Model 3 front main seal?

There are 13 torque specifications for front main seal on the 2017-2020 Tesla Model 3 Standard Range Plus Single Motor RWD, covering all related fasteners and components.