P1225high severityPowertrain
Cylinder 1 Fuel Injector Current Circuit
on 2013 Audi A6 3.0L Supercharged V6 · AWD
What this code means
The ECU detected that the current draw of the Cylinder 1 fuel injector is outside the expected range. The injector coil may be partially shorted or open, affecting fuel delivery accuracy.
Symptoms
- Check Engine Light
- Misfire on Cylinder 1
- Rough idle
- Poor acceleration
Common causes
- Faulty fuel injector coil Cylinder 1
- High-resistance connection in injector circuit
- ECU injector driver degradation
- Wiring damage
Diagnostic steps
- Measure injector resistance and compare to specification
- Test injector current draw with inductive clamp
- Inspect wiring and connector
- Swap injector to another cylinder to confirm fault follows
Repair notes
Replace the fuel injector on Cylinder 1 if current draw is out of specification.
Other Powertrain codes on this vehicle
P0001
Fuel Volume Regulator Control Circuit/Open
P0001
Fuel Volume Regulator Control Circuit/Open
P0002
Fuel Volume Regulator Control Circuit Range/Performance
P0002
Fuel Volume Regulator Control Circuit Range/Performance
P0003
Fuel Volume Regulator Control Circuit Low
P0003
Fuel Volume Regulator Control Circuit Low
P0004
Fuel Volume Regulator Control Circuit High
P0004
Fuel Volume Regulator Control Circuit High
P0010
Intake Camshaft Position Actuator Circuit/Open Bank 1
P0010
Intake Camshaft Position Actuator Circuit/Open Bank 1