P0220high severityPowertrain
Throttle/Pedal Position Sensor/Switch B Circuit
on 2013 Audi R8 5.2L V10 (Gen 1, 525hp) · AWD
What this code means
Malfunction in the secondary throttle position sensor or accelerator pedal position sensor.
Symptoms
- Check Engine Light
- Limp mode
- Reduced power
- Poor throttle response
Common causes
- Faulty TPS B sensor
- Wiring damage
- Throttle body failure
- Pedal assembly failure
Diagnostic steps
- Test TPS B voltage
- Compare TPS A and B signals
- Inspect wiring
- Test pedal position sensor
Repair notes
Replace TPS or throttle body/pedal assembly.
Other Powertrain codes on this vehicle
P0001
Fuel Volume Regulator Control Circuit/Open
P0002
Fuel Volume Regulator Control Circuit Range/Performance
P0003
Fuel Volume Regulator Control Circuit Low
P0004
Fuel Volume Regulator Control Circuit High
P0010
Intake Camshaft Position Actuator Circuit/Open Bank 1
P0011
Intake Camshaft Position Timing Over-Advanced Bank 1
P0012
Intake Camshaft Position Timing Over-Retarded Bank 1
P0013
Exhaust Camshaft Position Actuator Circuit/Open Bank 1
P0014
Exhaust Camshaft Position Timing Over-Advanced Bank 1
P0015
Exhaust Camshaft Position Timing Over-Retarded Bank 1