P0219
Engine Overspeed Condition
1992-1998 BMW 325i E36 2.5L I6 M50 🇨🇦
High SeverityPowertrain
Description
The engine RPM has exceeded the maximum programmed limit.
Symptoms
- Check Engine Light
- Fuel cutoff activated
- Rev limiter engaged
Common Causes
- Transmission slipping under load
- Clutch slipping (manual trans)
- PCM miscalibration
- Downshift at too high speed
Diagnostic Steps
- Check transmission operation
- Test clutch (manual)
- Review operating conditions from freeze frame
Repair Notes
Diagnose why engine reached excessive RPM. Check transmission or clutch.
Other Powertrain Codes
- P0001Fuel Volume Regulator Control Circuit/Open
- P0002Fuel Volume Regulator Control Circuit Range/Performance
- P0003Fuel Volume Regulator Control Circuit Low
- P0004Fuel Volume Regulator Control Circuit High
- P0010Intake Camshaft Position Actuator Circuit/Open Bank 1
- P0011Intake Camshaft Position Timing Over-Advanced Bank 1
- P0012Intake Camshaft Position Timing Over-Retarded Bank 1
- P0013Exhaust Camshaft Position Actuator Circuit/Open Bank 1
- P0014Exhaust Camshaft Position Timing Over-Advanced Bank 1
- P0015Exhaust Camshaft Position Timing Over-Retarded Bank 1
P0219 on Other Vehicles
Common Questions
What does code P0219 mean on a 1992-1998 BMW 325i E36?
P0219 stands for "Engine Overspeed Condition". The engine RPM has exceeded the maximum programmed limit.
What are the symptoms of P0219 on a BMW 325i E36?
Common symptoms of P0219 include: Check Engine Light, Fuel cutoff activated, Rev limiter engaged.
What causes P0219 on a 1992-1998 BMW 325i E36?
Common causes of P0219 include: Transmission slipping under load, Clutch slipping (manual trans), PCM miscalibration, Downshift at too high speed.