P2016
Intake Manifold Runner Position Sensor/Switch Circuit Low Bank 1
2000-2005 Chevrolet Impala 3.8L V6 🇨🇦
Low SeverityPowertrain
Description
Low signal from the intake manifold runner position sensor on bank 1.
Symptoms
- Check engine light
- Runs in default mode
Common Causes
- Sensor short to ground
- Wiring damage
- Failed sensor
Diagnostic Steps
- Measure sensor output voltage
- Check wiring for shorts
Repair Notes
Replace position sensor or repair wiring.
Related Codes
Other Powertrain Codes
- P0001Fuel Volume Regulator Control Circuit/Open
- P0002Fuel Volume Regulator Control Circuit Range/Performance
- P0003Fuel Volume Regulator Control Circuit Low
- P0004Fuel Volume Regulator Control Circuit High
- P0010Intake Camshaft Position Actuator Circuit/Open Bank 1
- P0011Intake Camshaft Position Timing Over-Advanced Bank 1
- P0012Intake Camshaft Position Timing Over-Retarded Bank 1
- P0013Exhaust Camshaft Position Actuator Circuit/Open Bank 1
- P0014Exhaust Camshaft Position Timing Over-Advanced Bank 1
- P0015Exhaust Camshaft Position Timing Over-Retarded Bank 1
P2016 on Other Vehicles
Chevrolet Astro
1995-2005 4.3L V6 Vortec
Chevrolet Avalanche
2002-2006 5.3L V8 Vortec
Chevrolet Avalanche
2002-2006 8.1L V8 Vortec
Chevrolet Avalanche
2007-2013 5.3L V8 Vortec
Chevrolet Avalanche
2007-2013 6.0L V8 Vortec
Chevrolet Aveo
2012-2018 1.6L I4
Chevrolet Beat
2018-2021 1.2L I4
Chevrolet Beretta
1990-1996 2.2L I4
Common Questions
What does code P2016 mean on a 2000-2005 Chevrolet Impala?
P2016 stands for "Intake Manifold Runner Position Sensor/Switch Circuit Low Bank 1". Low signal from the intake manifold runner position sensor on bank 1.
What are the symptoms of P2016 on a Chevrolet Impala?
Common symptoms of P2016 include: Check engine light, Runs in default mode.
What causes P2016 on a 2000-2005 Chevrolet Impala?
Common causes of P2016 include: Sensor short to ground, Wiring damage, Failed sensor.