MAP Sensor Reading Exceeds Barometric Pressure
1995-2000 Dodge Avenger 2.5L V6 🇨🇦
Description
The PCM has detected that the MAP sensor reading exceeds the barometric pressure reading, which is physically impossible under normal conditions. This indicates a sensor fault or a significant pressure anomaly in the intake manifold.
Symptoms
- Check Engine Light
- Poor engine performance
- Rough idle
- Black smoke from exhaust
- Poor fuel economy
Common Causes
- Faulty MAP sensor
- MAP sensor vacuum hose disconnected or leaking
- Short circuit in MAP sensor wiring
- PCM reference voltage issue
- Intake manifold pressure anomaly
Diagnostic Steps
- Compare MAP sensor reading at key-on engine-off to barometric pressure
- Inspect MAP sensor vacuum hose for leaks or disconnection
- Test MAP sensor output voltage range
- Check 5V reference circuit
- Verify MAP sensor wiring for shorts
Repair Notes
Replace the MAP sensor if its reading exceeds barometric pressure with the engine off.
Related Codes
Other Powertrain Codes
- P0001Fuel Volume Regulator Control Circuit/Open
- P0002Fuel Volume Regulator Control Circuit Range/Performance
- P0003Fuel Volume Regulator Control Circuit Low
- P0004Fuel Volume Regulator Control Circuit High
- P0010Intake Camshaft Position Actuator Circuit/Open Bank 1
- P0011Intake Camshaft Position Timing Over-Advanced Bank 1
- P0012Intake Camshaft Position Timing Over-Retarded Bank 1
- P0013Exhaust Camshaft Position Actuator Circuit/Open Bank 1
- P0014Exhaust Camshaft Position Timing Over-Advanced Bank 1
- P0015Exhaust Camshaft Position Timing Over-Retarded Bank 1
P1296 on Other Vehicles
Common Questions
What does code P1296 mean on a 1995-2000 Dodge Avenger?
P1296 stands for "MAP Sensor Reading Exceeds Barometric Pressure". The PCM has detected that the MAP sensor reading exceeds the barometric pressure reading, which is physically impossible under normal conditions. This indicates a sensor fault or a significant pressure anomaly in the intake manifold.
What are the symptoms of P1296 on a Dodge Avenger?
Common symptoms of P1296 include: Check Engine Light, Poor engine performance, Rough idle, Black smoke from exhaust, Poor fuel economy.
What causes P1296 on a 1995-2000 Dodge Avenger?
Common causes of P1296 include: Faulty MAP sensor, MAP sensor vacuum hose disconnected or leaking, Short circuit in MAP sensor wiring, PCM reference voltage issue, Intake manifold pressure anomaly.