EPS Torque Sensor Signal Abnormal
2012-2016 Ferrari FF 6.3L V12 🇨🇦
Description
The EPS torque sensor is producing an abnormal signal pattern during steering input.
Symptoms
- EPS assist intermittent
- Steering assist fluctuates
- Jerky power steering feel
- EPS warning light
Common Causes
- Torque sensor internal wear
- Torsion bar fatigue in sensor
- Connector intermittent contact
- Steering column bearing wear affecting sensor
Diagnostic Steps
- Monitor torque sensor signal during slow steering sweeps
- Look for signal dropouts or sudden jumps
- Check for mechanical play in steering column
- Inspect connector pin tension
- Compare dual-channel torque sensor signals
Repair Notes
Replace torque sensor if signal is erratic. Check steering column bearings.
Related Codes
Other Chassis Codes
- C0021LF Wheel Speed Sensor Range/Performance
- C0022RF Wheel Speed Sensor Range/Performance
- C0023LR Wheel Speed Sensor Range/Performance
- C0024RR Wheel Speed Sensor Range/Performance
- C0025LF Wheel Speed Sensor Circuit Intermittent
- C0026RF Wheel Speed Sensor Circuit Intermittent
- C0027LR Wheel Speed Sensor Circuit Intermittent
- C0028RR Wheel Speed Sensor Circuit Intermittent
- C0035Left Front Wheel Speed Sensor Circuit
- C0036Left Front Wheel Speed Signal Erratic
C0211 on Other Vehicles
Ferrari 296 GTB
2022-2024 3.0L V6 Hybrid
Ferrari 296 GTS
2022-2024 3.0L V6 Hybrid
Ferrari 360 Challenge Stradale
2003-2005 3.6L V8
Ferrari 360 Modena
1999-2005 3.6L V8
Ferrari 430 Scuderia
2007-2009 4.3L V8
Ferrari 456 GT
1993-2003 5.5L V12
Ferrari 458 Italia
2009-2015 4.5L V8
Ferrari 458 Speciale
2013-2015 4.5L V8
Common Questions
What does code C0211 mean on a 2012-2016 Ferrari FF?
C0211 stands for "EPS Torque Sensor Signal Abnormal". The EPS torque sensor is producing an abnormal signal pattern during steering input.
What are the symptoms of C0211 on a Ferrari FF?
Common symptoms of C0211 include: EPS assist intermittent, Steering assist fluctuates, Jerky power steering feel, EPS warning light.
What causes C0211 on a 2012-2016 Ferrari FF?
Common causes of C0211 include: Torque sensor internal wear, Torsion bar fatigue in sensor, Connector intermittent contact, Steering column bearing wear affecting sensor.