P0013
Exhaust Camshaft Position Actuator Circuit/Open Bank 1
2012-2016 Ferrari FF 6.3L V12 🇨🇦
Moderate SeverityPowertrain
Description
The PCM detected a malfunction in the exhaust camshaft position actuator (VVT solenoid) circuit for Bank 1.
Symptoms
- Check Engine Light
- Rough idle
- Poor emissions
- Reduced power
Common Causes
- Faulty exhaust VVT solenoid
- Wiring damage
- PCM failure
- Low oil level
Diagnostic Steps
- Test VVT solenoid resistance
- Inspect wiring
- Check oil level
- Command solenoid with scan tool
Repair Notes
Replace exhaust VVT solenoid or repair wiring.
Related Codes
Other Powertrain Codes
- P0001Fuel Volume Regulator Control Circuit/Open
- P0002Fuel Volume Regulator Control Circuit Range/Performance
- P0003Fuel Volume Regulator Control Circuit Low
- P0004Fuel Volume Regulator Control Circuit High
- P0010Intake Camshaft Position Actuator Circuit/Open Bank 1
- P0011Intake Camshaft Position Timing Over-Advanced Bank 1
- P0012Intake Camshaft Position Timing Over-Retarded Bank 1
- P0014Exhaust Camshaft Position Timing Over-Advanced Bank 1
- P0015Exhaust Camshaft Position Timing Over-Retarded Bank 1
- P0016Crankshaft Position/Camshaft Position Correlation Bank 1 Sensor A
P0013 on Other Vehicles
Ferrari 296 GTB
2022-2024 3.0L V6 Hybrid
Ferrari 296 GTS
2022-2024 3.0L V6 Hybrid
Ferrari 360 Challenge Stradale
2003-2005 3.6L V8
Ferrari 360 Modena
1999-2005 3.6L V8
Ferrari 430 Scuderia
2007-2009 4.3L V8
Ferrari 456 GT
1993-2003 5.5L V12
Ferrari 458 Italia
2009-2015 4.5L V8
Ferrari 458 Speciale
2013-2015 4.5L V8
Common Questions
What does code P0013 mean on a 2012-2016 Ferrari FF?
P0013 stands for "Exhaust Camshaft Position Actuator Circuit/Open Bank 1". The PCM detected a malfunction in the exhaust camshaft position actuator (VVT solenoid) circuit for Bank 1.
What are the symptoms of P0013 on a Ferrari FF?
Common symptoms of P0013 include: Check Engine Light, Rough idle, Poor emissions, Reduced power.
What causes P0013 on a 2012-2016 Ferrari FF?
Common causes of P0013 include: Faulty exhaust VVT solenoid, Wiring damage, PCM failure, Low oil level.