P2104
Throttle Actuator Control System Forced Idle
2012-2016 Ferrari FF 6.3L V12 🇨🇦
Critical SeverityPowertrain
Description
ECM has forced the engine to idle speed only due to a detected throttle control fault.
Symptoms
- Engine stuck at idle
- Check engine light
- Vehicle barely moves
- Traction control light on
Common Causes
- Throttle body failure
- APP sensor fault
- Wiring issue
- ECM detected conflicting throttle signals
Diagnostic Steps
- Scan for other DTCs
- Check APP sensor signals
- Inspect throttle body
- Clear codes and test
Repair Notes
Diagnose root cause from accompanying DTCs. This is a protective measure.
Related Codes
Other Powertrain Codes
- P0001Fuel Volume Regulator Control Circuit/Open
- P0002Fuel Volume Regulator Control Circuit Range/Performance
- P0003Fuel Volume Regulator Control Circuit Low
- P0004Fuel Volume Regulator Control Circuit High
- P0010Intake Camshaft Position Actuator Circuit/Open Bank 1
- P0011Intake Camshaft Position Timing Over-Advanced Bank 1
- P0012Intake Camshaft Position Timing Over-Retarded Bank 1
- P0013Exhaust Camshaft Position Actuator Circuit/Open Bank 1
- P0014Exhaust Camshaft Position Timing Over-Advanced Bank 1
- P0015Exhaust Camshaft Position Timing Over-Retarded Bank 1
P2104 on Other Vehicles
Ferrari 296 GTB
2022-2024 3.0L V6 Hybrid
Ferrari 296 GTS
2022-2024 3.0L V6 Hybrid
Ferrari 360 Challenge Stradale
2003-2005 3.6L V8
Ferrari 360 Modena
1999-2005 3.6L V8
Ferrari 430 Scuderia
2007-2009 4.3L V8
Ferrari 456 GT
1993-2003 5.5L V12
Ferrari 458 Italia
2009-2015 4.5L V8
Ferrari 458 Speciale
2013-2015 4.5L V8
Common Questions
What does code P2104 mean on a 2012-2016 Ferrari FF?
P2104 stands for "Throttle Actuator Control System Forced Idle". ECM has forced the engine to idle speed only due to a detected throttle control fault.
What are the symptoms of P2104 on a Ferrari FF?
Common symptoms of P2104 include: Engine stuck at idle, Check engine light, Vehicle barely moves, Traction control light on.
What causes P2104 on a 2012-2016 Ferrari FF?
Common causes of P2104 include: Throttle body failure, APP sensor fault, Wiring issue, ECM detected conflicting throttle signals.