U0420
Invalid Data Received from Ride Level Control Module
2012-2016 Ferrari FF 6.3L V12 🇨🇦
Moderate SeverityNetwork
Description
Data from the air suspension or ride height control module is corrupted.
Symptoms
- Suspension warning light
- Incorrect ride height
- Vehicle listing to one side
- Compressor cycling abnormally
Common Causes
- Height sensor calibration lost
- CAN bus noise
- Module sending incorrect data
- Sensor wiring issue
Diagnostic Steps
- Check ride height sensor readings
- Recalibrate suspension module
- Test CAN bus quality
- Inspect height sensor wiring
- Compare actual vs reported ride height
Repair Notes
Recalibrate ride height sensors. Check sensor wiring at each corner.
Related Codes
Other Network Codes
- U0001High Speed CAN Communication Bus
- U0002High Speed CAN Communication Bus Performance
- U0003High Speed CAN Communication Bus (+) Open
- U0004High Speed CAN Communication Bus (+) Low
- U0005High Speed CAN Communication Bus (+) High
- U0006High Speed CAN Communication Bus (-) Open
- U0007High Speed CAN Communication Bus (-) Low
- U0008High Speed CAN Communication Bus (-) High
- U0009High Speed CAN Communication Bus Shorted Together
- U0010Medium Speed CAN Communication Bus
U0420 on Other Vehicles
Ferrari 296 GTB
2022-2024 3.0L V6 Hybrid
Ferrari 296 GTS
2022-2024 3.0L V6 Hybrid
Ferrari 360 Challenge Stradale
2003-2005 3.6L V8
Ferrari 360 Modena
1999-2005 3.6L V8
Ferrari 430 Scuderia
2007-2009 4.3L V8
Ferrari 456 GT
1993-2003 5.5L V12
Ferrari 458 Italia
2009-2015 4.5L V8
Ferrari 458 Speciale
2013-2015 4.5L V8
Common Questions
What does code U0420 mean on a 2012-2016 Ferrari FF?
U0420 stands for "Invalid Data Received from Ride Level Control Module". Data from the air suspension or ride height control module is corrupted.
What are the symptoms of U0420 on a Ferrari FF?
Common symptoms of U0420 include: Suspension warning light, Incorrect ride height, Vehicle listing to one side, Compressor cycling abnormally.
What causes U0420 on a 2012-2016 Ferrari FF?
Common causes of U0420 include: Height sensor calibration lost, CAN bus noise, Module sending incorrect data, Sensor wiring issue.