The 1997 E-350 with the 6.8L V10 Triton is a workhorse van plagued by catastrophic spark plug ejection issues and early transmission failures. The V10 was Ford's answer to heavy-duty needs, but first-generation reliability problems make this a high-risk purchase without documented repairs.
Spark Plug Ejection from Cylinder Head
Common · high severityTypical onset: 60,000-150,000 mi
Symptoms: Sudden loud pop or hissing sound from engine bay, Immediate misfire and loss of power, Check engine light with misfire codes (P0300-P0310), Visible spark plug dangling or completely blown out, Coolant or compression leaking from spark plug hole
Fix: Two-piece aluminum heads on early Triton V10s have inadequate thread engagement. Plugs blow out under load, stripping threads. Requires HeliCoil or TimeSert thread repair kit per cylinder (2-3 hours each), but if head is severely damaged, needs head removal and machine shop work or replacement (12-16 hours labor). Many shops recommend preventive inserts on all cylinders once one fails. Some engines need complete heads.
Estimated cost: $800-1,200 per cylinder for insert, $3,500-5,500 for head R&R if damaged
Catastrophic Engine Failure (Piston/Rod/Bearing)
Occasional · high severityTypical onset: 80,000-180,000 mi
Symptoms: Severe knocking or rattling from bottom end, Metal shavings in oil or glitter on dipstick, Sudden loss of oil pressure, Connecting rod punches through block, Seized engine or complete mechanical failure
Fix: Early 6.8L V10s suffer from weak piston skirts, inadequate ring support, and bearing failures under sustained load (towing, heavy cargo). Failure mode is often catastrophic—rod through the block. Requires complete engine replacement or full rebuild with upgraded pistons/rings (35-45 hours labor). Junkyard engines carry same risk; remanufactured units with updated internals are the only safe bet.
Estimated cost: $5,500-9,000 for reman engine installed, $4,000-7,000 for full rebuild with upgrades
4R100 Transmission Failure
Common · high severityTypical onset: 90,000-140,000 mi
Symptoms: Slipping on 2-3 or 3-4 shifts under load, Harsh or delayed engagement into gear, Burnt transmission fluid smell and dark fluid color, Loss of overdrive or stuck in lower gear, Transmission overheating, especially when towing
Fix: The 4R100 behind the V10 is overworked and prone to torque converter failure, worn clutch packs, and valve body issues. Band adjustments and fluid changes only delay the inevitable. Needs rebuild with upgraded clutches and shift kit (12-16 hours), or replacement. External cooler lines and separate cooler are mandatory to extend life.
Estimated cost: $2,200-3,800 for rebuild, $2,800-4,200 for reman unit installed
Intake Manifold Gasket Failure
Common · medium severityTypical onset: 70,000-130,000 mi
Symptoms: Coolant loss with no visible external leaks, White smoke from exhaust on startup, Rough idle or misfires when cold, Coolant in oil (milky dipstick) in severe cases, Overheating or coolant smell from vents
Fix: The V10's plastic intake manifold and paper gaskets deteriorate, allowing coolant into cylinders or oil passages. Requires intake manifold removal, gasket replacement, and often new manifold if warped (8-12 hours labor). Ford updated to improved gaskets; always use latest parts. Check for head gasket damage if coolant contamination is severe.
Estimated cost: $900-1,600 depending on manifold condition
Cruise Control Deactivation Cable Failure
Occasional · high severitySymptoms: Cruise control stays engaged when brake pedal is pressed, Unable to disengage cruise with brake, Vehicle continues accelerating despite braking, Cruise control becomes intermittently unresponsive
Fix: NHTSA recall-level issue: the speed control deactivation cable and switch can fail, preventing cruise disengagement. Multiple recalls issued (98V102000, 99V085000). Cable frays or sticks, leaving throttle engaged. Requires deactivation switch and cable replacement (1.5-2.5 hours). Check recall status—some were incomplete repairs. Disable cruise entirely if symptoms appear until fixed.
Estimated cost: $200-400 if not covered by recall
Fuel Tank Crossover Line Corrosion
Occasional · medium severitySymptoms: Fuel smell inside cabin or under vehicle, Visible fuel dripping from mid-vehicle area, Fuel gauge reads incorrectly or inconsistently, One tank empties faster than the other, Check engine light with fuel system lean codes
Fix: Dual-tank E-350s use steel crossover lines that rust through, especially in salt states. Lines run along frame rails and corrode where they mount. Requires replacement of crossover hoses and steel lines (3-5 hours, requires lifting vehicle and draining tanks). Also check fuel pump and sender seals while accessing tanks.
Estimated cost: $450-850 for lines and labor
Buy only if the engine has been rebuilt with upgraded pistons and all spark plug threads have been repaired—otherwise, you're gambling on a $6,000+ catastrophic failure.
AI-assisted summary drawn from NHTSA recall data, our labor-times database, and platform knowledge. Not a substitute for a pre-purchase inspection on a specific vehicle.