Lost Communication with Headlamp Leveling Module
2016-2019 Ford Explorer 3.5L V6 🇨🇦
Description
Cannot communicate with the automatic headlamp leveling control module.
Symptoms
- Headlight level warning
- Headlights aimed incorrectly
- Auto-leveling not functioning
- Headlight error message
Common Causes
- Headlamp leveling module failure
- CAN bus wiring
- Module power loss
- Fuse blown
- Leveling motor failure
- Height sensor issue
Diagnostic Steps
- Check leveling module fuse
- Test power and ground
- Check CAN wiring
- Test leveling motors
- Check ride height sensor input
Repair Notes
Check fuses and headlamp leveling motors. System uses suspension height sensors for input.
Related Codes
Other Network Codes
- U0001High Speed CAN Communication Bus
- U0001High Speed CAN Communication Bus
- U0002High Speed CAN Communication Bus Performance
- U0002High Speed CAN Communication Bus Performance
- U0003High Speed CAN Communication Bus (+) Open
- U0003High Speed CAN Communication Bus (+) Open
- U0004High Speed CAN Communication Bus (+) Low
- U0004High Speed CAN Communication Bus (+) Low
- U0005High Speed CAN Communication Bus (+) High
- U0005High Speed CAN Communication Bus (+) High
U0200 on Other Vehicles
Ford Bronco
2021-2024 2.3L I4 EcoBoost
Ford Bronco
2021-2024 2.7L V6 EcoBoost
Ford Bronco Raptor
2022-2024 3.0L V6 EcoBoost
Ford Bronco Sport
2021-2024 1.5L I3 EcoBoost
Ford Bronco Sport
2021-2024 2.0L I4 EcoBoost
Ford Crown Victoria
1998-2011 4.6L V8 Modular 2V
Ford E-150
1997-2014 4.6L V8 Triton
Ford E-150
1997-2014 5.4L V8 Triton
Common Questions
What does code U0200 mean on a 2016-2019 Ford Explorer?
U0200 stands for "Lost Communication with Headlamp Leveling Module". Cannot communicate with the automatic headlamp leveling control module.
What are the symptoms of U0200 on a Ford Explorer?
Common symptoms of U0200 include: Headlight level warning, Headlights aimed incorrectly, Auto-leveling not functioning, Headlight error message.
What causes U0200 on a 2016-2019 Ford Explorer?
Common causes of U0200 include: Headlamp leveling module failure, CAN bus wiring, Module power loss, Fuse blown, Leveling motor failure, Height sensor issue.