Immobilizer Code Not Programmed
2012-2018 Ford Focus Electric Electric Motor 🇨🇦
Description
The PATS immobilizer code has not been programmed into the PCM. This typically occurs when a new PCM is installed without completing the security programming procedure.
Symptoms
- Engine will not start
- Security light on or flashing
- No fuel delivery or spark
Common Causes
- New PCM installed without PATS programming
- PCM memory corruption
- Failed key programming procedure
Diagnostic Steps
- Verify PCM is programmed with PATS codes
- Perform key programming procedure
- Check for PCM software updates
Repair Notes
Program PATS codes into PCM using dealer-level scan tool. Program at least 2 keys.
Related Codes
Other Powertrain Codes
- P0070Ambient Air Temperature Sensor Circuit
- P0071Ambient Air Temperature Sensor Range/Performance
- P0072Ambient Air Temperature Sensor Circuit Low
- P0073Ambient Air Temperature Sensor Circuit High
- P0115Engine Coolant Temperature (ECT) Sensor 1 Circuit
- P0116ECT Sensor 1 Circuit Range/Performance
- P0117ECT Sensor 1 Circuit Low Input
- P0118ECT Sensor 1 Circuit High Input
- P0119ECT Sensor 1 Circuit Intermittent
- P0125Insufficient Coolant Temperature for Closed Loop Fuel Control
P1269 on Other Vehicles
Common Questions
What does code P1269 mean on a 2012-2018 Ford Focus Electric?
P1269 stands for "Immobilizer Code Not Programmed". The PATS immobilizer code has not been programmed into the PCM. This typically occurs when a new PCM is installed without completing the security programming procedure.
What are the symptoms of P1269 on a Ford Focus Electric?
Common symptoms of P1269 include: Engine will not start, Security light on or flashing, No fuel delivery or spark.
What causes P1269 on a 2012-2018 Ford Focus Electric?
Common causes of P1269 include: New PCM installed without PATS programming, PCM memory corruption, Failed key programming procedure.