P1742high severityPowertrain
Torque Converter Clutch Solenoid Failed On
on 2021 Ford Mustang Mach-E Standard Range Dual Motor AWD · RWD
What this code means
The TCC solenoid has failed in the on/engaged position. The torque converter clutch remains engaged when it should not be, which can cause the engine to stall when coming to a stop (similar to a manual transmission with the clutch engaged).
Symptoms
- Engine stalls when stopping in Drive
- Harsh engagement at low speeds
- Vehicle shudders at slow speeds
- Check Engine Light
Common causes
- TCC solenoid stuck mechanically on
- Electrical fault keeping solenoid energized
- Valve body TCC apply valve stuck
- Contaminated transmission fluid
Diagnostic steps
- Test TCC solenoid — it should de-energize when commanded off
- Check solenoid wiring for shorts to power
- Check valve body for stuck TCC valve
- Monitor TCC status on scan tool during deceleration
Repair notes
Replace TCC solenoid. Inspect valve body. May require transmission pan removal.
Other Powertrain codes on this vehicle
P0070
Ambient Air Temperature Sensor Circuit
P0071
Ambient Air Temperature Sensor Range/Performance
P0072
Ambient Air Temperature Sensor Circuit Low
P0073
Ambient Air Temperature Sensor Circuit High
P0115
Engine Coolant Temperature (ECT) Sensor 1 Circuit
P0116
ECT Sensor 1 Circuit Range/Performance
P0117
ECT Sensor 1 Circuit Low Input
P0118
ECT Sensor 1 Circuit High Input
P0119
ECT Sensor 1 Circuit Intermittent
P0125
Insufficient Coolant Temperature for Closed Loop Fuel Control