P1307low severityPowertrain
Rough Road Sensor Malfunction
on 2011 Hyundai Tucson 2.0L I4 · AWD
What this code means
The PCM has detected a malfunction with the rough road sensor or its circuit. The rough road sensor tells the PCM when the vehicle is on rough terrain so it can distinguish road-induced crankshaft speed variation from actual misfires.
Symptoms
- Check Engine Light
- False misfire codes may set on rough roads
- No driveability symptoms typically
Common causes
- Faulty rough road sensor
- Wiring issue in rough road sensor circuit
- Sensor connector corrosion
- ABS wheel speed sensor issue providing rough road data
Diagnostic steps
- Check rough road sensor signal on scan tool
- Inspect sensor wiring and connector
- Test sensor output
- Check if ABS wheel speed sensors are providing data
Repair notes
Replace the rough road sensor or repair wiring; false misfire codes should stop after repair.
Other Powertrain codes on this vehicle
P0001
Fuel Volume Regulator Control Circuit/Open
P0001
Fuel Volume Regulator Control Circuit/Open
P0002
Fuel Volume Regulator Control Circuit Range/Performance
P0002
Fuel Volume Regulator Control Circuit Range/Performance
P0003
Fuel Volume Regulator Control Circuit Low
P0003
Fuel Volume Regulator Control Circuit Low
P0004
Fuel Volume Regulator Control Circuit High
P0004
Fuel Volume Regulator Control Circuit High
P0010
Intake Camshaft Position Actuator Circuit/Open Bank 1
P0010
Intake Camshaft Position Actuator Circuit/Open Bank 1