P1506moderate severityPowertrain
IAC Valve Opening Coil Circuit Short
on 2011 Hyundai Tucson 2.0L I4 · AWD
What this code means
The PCM has detected a short circuit in the IAC valve opening coil circuit. This can cause the IAC valve to remain energized or draw excessive current, affecting idle speed control.
Symptoms
- Check Engine Light
- Erratic idle speed
- High idle speed
- IAC valve overheating
Common causes
- Short to ground in IAC opening coil wiring
- IAC valve internal coil short
- Chafed wiring contacting ground
- Connector with bridged pins
- Water intrusion in connector
Diagnostic steps
- Test IAC opening coil resistance (low reading indicates short)
- Inspect wiring for chafing or damage
- Check connector for bridged pins or water intrusion
- Disconnect IAC and test circuit resistance to ground
- Replace IAC valve and retest
Repair notes
Replace the IAC valve if shorted internally; repair wiring if the short is external.
Other Powertrain codes on this vehicle
P0001
Fuel Volume Regulator Control Circuit/Open
P0001
Fuel Volume Regulator Control Circuit/Open
P0002
Fuel Volume Regulator Control Circuit Range/Performance
P0002
Fuel Volume Regulator Control Circuit Range/Performance
P0003
Fuel Volume Regulator Control Circuit Low
P0003
Fuel Volume Regulator Control Circuit Low
P0004
Fuel Volume Regulator Control Circuit High
P0004
Fuel Volume Regulator Control Circuit High
P0010
Intake Camshaft Position Actuator Circuit/Open Bank 1
P0010
Intake Camshaft Position Actuator Circuit/Open Bank 1