P0125moderate severityPowertrain
Insufficient Coolant Temperature for Closed Loop Fuel Control
on 2016 Jeep Wrangler 3.6L V6 · 4WD
What this code means
The engine is not reaching normal operating temperature quickly enough for the PCM to enter closed-loop fuel control.
Symptoms
- Check Engine Light
- Poor fuel economy
- Extended warmup time
- Rich exhaust smell
Common causes
- Stuck-open thermostat
- Faulty ECT sensor
- Cooling fan running constantly
- Low coolant level
Diagnostic steps
- Monitor ECT warmup time (should reach 160°F within 5-10 min)
- Test thermostat
- Check cooling fan operation
- Test ECT sensor
Repair notes
Replace thermostat. Most common cause.
Other Powertrain codes on this vehicle
P0001
Fuel Volume Regulator Control Circuit/Open
P0002
Fuel Volume Regulator Control Circuit Range/Performance
P0003
Fuel Volume Regulator Control Circuit Low
P0004
Fuel Volume Regulator Control Circuit High
P0010
Intake Camshaft Position Actuator Circuit/Open Bank 1
P0011
Intake Camshaft Position Timing Over-Advanced Bank 1
P0012
Intake Camshaft Position Timing Over-Retarded Bank 1
P0013
Exhaust Camshaft Position Actuator Circuit/Open Bank 1
P0014
Exhaust Camshaft Position Timing Over-Advanced Bank 1
P0015
Exhaust Camshaft Position Timing Over-Retarded Bank 1