P0215high severityPowertrain
Engine Shutoff Solenoid Malfunction
on 2018 Jeep Wrangler 3.6L V6 · 4WD
What this code means
The engine shutoff solenoid is not functioning properly.
Symptoms
- Check Engine Light
- Engine may not shut off
- Engine may not start
Common causes
- Faulty solenoid
- Wiring issue
- Relay failure
Diagnostic steps
- Test solenoid resistance
- Check wiring
- Test relay
Repair notes
Replace engine shutoff solenoid.
Other Powertrain codes on this vehicle
P0001
Fuel Volume Regulator Control Circuit/Open
P0002
Fuel Volume Regulator Control Circuit Range/Performance
P0003
Fuel Volume Regulator Control Circuit Low
P0004
Fuel Volume Regulator Control Circuit High
P0010
Intake Camshaft Position Actuator Circuit/Open Bank 1
P0011
Intake Camshaft Position Timing Over-Advanced Bank 1
P0012
Intake Camshaft Position Timing Over-Retarded Bank 1
P0013
Exhaust Camshaft Position Actuator Circuit/Open Bank 1
P0014
Exhaust Camshaft Position Timing Over-Advanced Bank 1
P0015
Exhaust Camshaft Position Timing Over-Retarded Bank 1