P2016
Intake Manifold Runner Position Sensor/Switch Circuit Low Bank 1
2007-2014 Land Rover LR2 3.2L I6 🇨🇦
Low SeverityPowertrain
Description
Low signal from the intake manifold runner position sensor on bank 1.
Symptoms
- Check engine light
- Runs in default mode
Common Causes
- Sensor short to ground
- Wiring damage
- Failed sensor
Diagnostic Steps
- Measure sensor output voltage
- Check wiring for shorts
Repair Notes
Replace position sensor or repair wiring.
Related Codes
Other Powertrain Codes
- P0001Fuel Volume Regulator Control Circuit/Open
- P0002Fuel Volume Regulator Control Circuit Range/Performance
- P0003Fuel Volume Regulator Control Circuit Low
- P0004Fuel Volume Regulator Control Circuit High
- P0010Intake Camshaft Position Actuator Circuit/Open Bank 1
- P0011Intake Camshaft Position Timing Over-Advanced Bank 1
- P0012Intake Camshaft Position Timing Over-Retarded Bank 1
- P0013Exhaust Camshaft Position Actuator Circuit/Open Bank 1
- P0014Exhaust Camshaft Position Timing Over-Advanced Bank 1
- P0015Exhaust Camshaft Position Timing Over-Retarded Bank 1
P2016 on Other Vehicles
Land Rover Defender V8
2022-2024 5.0L V8 Supercharged
Land Rover Discovery
1994-2004 4.0L V8
Land Rover Discovery
2017-2024 3.0L V6 Supercharged
Land Rover Discovery Sport
2015-2024 2.0L I4 Turbo
Land Rover Freelander
1997-2006 2.5L V6
Land Rover LR3
2005-2009 4.4L V8
Land Rover LR4
2010-2016 5.0L V8
Land Rover Range Rover Evoque
2012-2024 2.0L I4 Turbo
Common Questions
What does code P2016 mean on a 2007-2014 Land Rover LR2?
P2016 stands for "Intake Manifold Runner Position Sensor/Switch Circuit Low Bank 1". Low signal from the intake manifold runner position sensor on bank 1.
What are the symptoms of P2016 on a Land Rover LR2?
Common symptoms of P2016 include: Check engine light, Runs in default mode.
What causes P2016 on a 2007-2014 Land Rover LR2?
Common causes of P2016 include: Sensor short to ground, Wiring damage, Failed sensor.