P1410
EGR Valve Position Sensor Circuit
2006-2011 Lexus GS 350 3.5L V6 🇨🇦
Moderate SeverityPowertrain
Description
The ECM detected a fault in the EGR valve position sensor circuit.
Symptoms
- CEL
- Rough idle
- Hesitation
- Increased NOx
- Failed emissions
Common Causes
- Faulty EGR position sensor
- Carbon buildup
- Damaged wiring
- Corroded connector
Diagnostic Steps
- Test sensor voltage
- Clean EGR valve
- Inspect wiring
- Command EGR with scan tool
Repair Notes
Replace EGR valve or sensor.
Other Powertrain Codes
- P0001Fuel Volume Regulator Control Circuit/Open
- P0002Fuel Volume Regulator Control Circuit Range/Performance
- P0003Fuel Volume Regulator Control Circuit Low
- P0004Fuel Volume Regulator Control Circuit High
- P0010Intake Camshaft Position Actuator Circuit/Open Bank 1
- P0011Intake Camshaft Position Timing Over-Advanced Bank 1
- P0012Intake Camshaft Position Timing Over-Retarded Bank 1
- P0013Exhaust Camshaft Position Actuator Circuit/Open Bank 1
- P0014Exhaust Camshaft Position Timing Over-Advanced Bank 1
- P0015Exhaust Camshaft Position Timing Over-Retarded Bank 1
P1410 on Other Vehicles
Common Questions
What does code P1410 mean on a 2006-2011 Lexus GS 350?
P1410 stands for "EGR Valve Position Sensor Circuit". The ECM detected a fault in the EGR valve position sensor circuit.
What are the symptoms of P1410 on a Lexus GS 350?
Common symptoms of P1410 include: CEL, Rough idle, Hesitation, Increased NOx, Failed emissions.
What causes P1410 on a 2006-2011 Lexus GS 350?
Common causes of P1410 include: Faulty EGR position sensor, Carbon buildup, Damaged wiring, Corroded connector.