SRS Control Module Calibration Error
2000-2005 Mitsubishi Eclipse 2.4L I4 🇨🇦
Description
The SRS control module calibration data is invalid, missing, or does not match the vehicle configuration.
Symptoms
- Airbag warning light on
- SRS system fully disabled
- All deployment circuits inactive
Common Causes
- Module not programmed to vehicle
- Incorrect replacement module
- Software update failed
- Module from different vehicle installed
Diagnostic Steps
- Verify ACM part number matches vehicle
- Check module calibration with scan tool
- Attempt recalibration/reprogramming
- Verify VIN programming in module
Repair Notes
Reprogram ACM with correct vehicle calibration. Replace if reprogramming fails.
Related Codes
Other Body Codes
- B0001Driver Frontal Stage 1 Deployment Control
- B0002Driver Frontal Stage 2 Deployment Control
- B0003Passenger Frontal Stage 1 Deployment Control
- B0004Passenger Frontal Stage 2 Deployment Control
- B0005Driver Knee Airbag Deployment Circuit
- B0006Passenger Knee Airbag Deployment Circuit
- B0007Rear Left Side Airbag Deployment Circuit
- B0008Rear Right Side Airbag Deployment Circuit
- B0010Driver Side Airbag Deployment
- B0011Driver Side Airbag Deployment Circuit Open
B0090 on Other Vehicles
Mitsubishi 3000GT
1991-1999 3.0L V6
Mitsubishi 3000GT VR-4
1991-1999 3.0L Twin Turbo V6
Mitsubishi 3000GT VR-4
1991-1999 3.0L V6 Twin Turbo
Mitsubishi Colt JP
2002-2012 1.3L I4 4A90
Mitsubishi Colt JP
2002-2012 1.5L I4 4A91
Mitsubishi Delica D:5
2019-2025 2.2L I4 Turbo Diesel 4N14
Mitsubishi Diamante
1992-1996 3.0L V6
Mitsubishi Diamante
1997-2004 3.5L V6
Common Questions
What does code B0090 mean on a 2000-2005 Mitsubishi Eclipse?
B0090 stands for "SRS Control Module Calibration Error". The SRS control module calibration data is invalid, missing, or does not match the vehicle configuration.
What are the symptoms of B0090 on a Mitsubishi Eclipse?
Common symptoms of B0090 include: Airbag warning light on, SRS system fully disabled, All deployment circuits inactive.
What causes B0090 on a 2000-2005 Mitsubishi Eclipse?
Common causes of B0090 include: Module not programmed to vehicle, Incorrect replacement module, Software update failed, Module from different vehicle installed.