C0061
ABS Motor Relay Circuit
2000-2012 Mitsubishi Eclipse 2.4L I4 🇨🇦
Moderate SeverityChassis
Description
Malfunction in the ABS hydraulic pump motor relay control circuit.
Symptoms
- ABS light on
- ABS pump motor does not run
- ABS non-functional
- Clicking noise from relay area
Common Causes
- Faulty ABS relay
- Relay control circuit open or shorted
- ABS module relay driver failure
- Corroded relay socket
Diagnostic Steps
- Test ABS relay with multimeter
- Swap relay with identical known-good relay
- Check relay socket for corrosion
- Test relay control signal from ABS module
- Check fuse and power supply
Repair Notes
Replace ABS relay. Clean relay socket contacts.
Related Codes
Other Chassis Codes
- C0021LF Wheel Speed Sensor Range/Performance
- C0022RF Wheel Speed Sensor Range/Performance
- C0023LR Wheel Speed Sensor Range/Performance
- C0024RR Wheel Speed Sensor Range/Performance
- C0025LF Wheel Speed Sensor Circuit Intermittent
- C0026RF Wheel Speed Sensor Circuit Intermittent
- C0027LR Wheel Speed Sensor Circuit Intermittent
- C0028RR Wheel Speed Sensor Circuit Intermittent
- C0035Left Front Wheel Speed Sensor Circuit
- C0036Left Front Wheel Speed Signal Erratic
C0061 on Other Vehicles
Mitsubishi 3000GT
1991-1999 3.0L V6
Mitsubishi 3000GT VR-4
1991-1999 3.0L Twin Turbo V6
Mitsubishi 3000GT VR-4
1991-1999 3.0L V6 Twin Turbo
Mitsubishi Colt JP
2002-2012 1.3L I4 4A90
Mitsubishi Colt JP
2002-2012 1.5L I4 4A91
Mitsubishi Delica D:5
2019-2025 2.2L I4 Turbo Diesel 4N14
Mitsubishi Diamante
1992-1996 3.0L V6
Mitsubishi Diamante
1997-2004 3.5L V6
Common Questions
What does code C0061 mean on a 2000-2012 Mitsubishi Eclipse?
C0061 stands for "ABS Motor Relay Circuit". Malfunction in the ABS hydraulic pump motor relay control circuit.
What are the symptoms of C0061 on a Mitsubishi Eclipse?
Common symptoms of C0061 include: ABS light on, ABS pump motor does not run, ABS non-functional, Clicking noise from relay area.
What causes C0061 on a 2000-2012 Mitsubishi Eclipse?
Common causes of C0061 include: Faulty ABS relay, Relay control circuit open or shorted, ABS module relay driver failure, Corroded relay socket.