Brake Pad Wear Sensor Circuit Front
2000-2012 Mitsubishi Eclipse 2.4L I4 🇨🇦
Description
The front brake pad wear sensor circuit indicates a fault or that pads have reached minimum thickness.
Symptoms
- Brake pad warning light
- Service brakes message on dash
- Grinding noise from front brakes
Common Causes
- Front brake pads worn to minimum
- Wear sensor wire broken or chafed
- Sensor connector disconnected during service
- Sensor embedded in pad consumed by wear
Diagnostic Steps
- Check front brake pad thickness visually
- Inspect wear sensor wire for damage
- Check sensor connector
- Measure pad thickness with calipers
- Compare both front pad sets
Repair Notes
Replace front brake pads and wear sensors. Sensors are typically one-time use.
Related Codes
Other Chassis Codes
- C0021LF Wheel Speed Sensor Range/Performance
- C0022RF Wheel Speed Sensor Range/Performance
- C0023LR Wheel Speed Sensor Range/Performance
- C0024RR Wheel Speed Sensor Range/Performance
- C0025LF Wheel Speed Sensor Circuit Intermittent
- C0026RF Wheel Speed Sensor Circuit Intermittent
- C0027LR Wheel Speed Sensor Circuit Intermittent
- C0028RR Wheel Speed Sensor Circuit Intermittent
- C0035Left Front Wheel Speed Sensor Circuit
- C0036Left Front Wheel Speed Signal Erratic
C0130 on Other Vehicles
Mitsubishi 3000GT
1991-1999 3.0L V6
Mitsubishi 3000GT VR-4
1991-1999 3.0L Twin Turbo V6
Mitsubishi 3000GT VR-4
1991-1999 3.0L V6 Twin Turbo
Mitsubishi Colt JP
2002-2012 1.3L I4 4A90
Mitsubishi Colt JP
2002-2012 1.5L I4 4A91
Mitsubishi Delica D:5
2019-2025 2.2L I4 Turbo Diesel 4N14
Mitsubishi Diamante
1992-1996 3.0L V6
Mitsubishi Diamante
1997-2004 3.5L V6
Common Questions
What does code C0130 mean on a 2000-2012 Mitsubishi Eclipse?
C0130 stands for "Brake Pad Wear Sensor Circuit Front". The front brake pad wear sensor circuit indicates a fault or that pads have reached minimum thickness.
What are the symptoms of C0130 on a Mitsubishi Eclipse?
Common symptoms of C0130 include: Brake pad warning light, Service brakes message on dash, Grinding noise from front brakes.
What causes C0130 on a 2000-2012 Mitsubishi Eclipse?
Common causes of C0130 include: Front brake pads worn to minimum, Wear sensor wire broken or chafed, Sensor connector disconnected during service, Sensor embedded in pad consumed by wear.