Brake Pedal Position Sensor Range/Performance
2007-2012 Nissan Altima 2.5L I4 🇨🇦
Description
The brake pedal position sensor signal does not correlate with actual pedal travel or other brake sensors.
Symptoms
- ABS light on
- Brake assist inoperative
- Regenerative braking inconsistent
- Stability control disabled
Common Causes
- Brake pedal position sensor wear
- Mechanical linkage issue
- Sensor calibration drift
- Brake pedal free play excessive
Diagnostic Steps
- Compare pedal position sensor to brake pressure sensor data
- Check for dead spots in sensor range
- Inspect pedal linkage and pivot
- Verify pedal free play is within specification
- Perform sensor recalibration if applicable
Repair Notes
Replace sensor if worn. Adjust pedal free play to specification.
Related Codes
Other Chassis Codes
- C0021LF Wheel Speed Sensor Range/Performance
- C0022RF Wheel Speed Sensor Range/Performance
- C0023LR Wheel Speed Sensor Range/Performance
- C0024RR Wheel Speed Sensor Range/Performance
- C0025LF Wheel Speed Sensor Circuit Intermittent
- C0026RF Wheel Speed Sensor Circuit Intermittent
- C0027LR Wheel Speed Sensor Circuit Intermittent
- C0028RR Wheel Speed Sensor Circuit Intermittent
- C0035Left Front Wheel Speed Sensor Circuit
- C0036Left Front Wheel Speed Signal Erratic
C0101 on Other Vehicles
Nissan 200SX
1995-1998 1.6L I4 GA16DE
Nissan 200SX SE-R
1995-1998 2.0L I4 SR20DE
Nissan 240SX
1995-1998 2.4L I4 KA24DE
Nissan 300ZX
1990-1996 3.0L V6 VG30DE
Nissan 300ZX Twin Turbo
1990-1996 3.0L Twin-Turbo V6 VG30DETT
Nissan 350Z
2003-2006 3.5L V6 VQ35DE
Nissan 350Z
2007-2009 3.5L V6 VQ35HR
Nissan 370Z
2009-2020 3.7L V6 VQ37VHR
Common Questions
What does code C0101 mean on a 2007-2012 Nissan Altima?
C0101 stands for "Brake Pedal Position Sensor Range/Performance". The brake pedal position sensor signal does not correlate with actual pedal travel or other brake sensors.
What are the symptoms of C0101 on a Nissan Altima?
Common symptoms of C0101 include: ABS light on, Brake assist inoperative, Regenerative braking inconsistent, Stability control disabled.
What causes C0101 on a 2007-2012 Nissan Altima?
Common causes of C0101 include: Brake pedal position sensor wear, Mechanical linkage issue, Sensor calibration drift, Brake pedal free play excessive.