C0131
Brake Pad Wear Sensor Circuit Rear
2000-2002 Rolls-Royce Corniche 6.75L V8 🇨🇦
Moderate SeverityChassis
Description
The rear brake pad wear sensor indicates pads are worn or the circuit is faulty.
Symptoms
- Brake pad warning light
- Service message for rear brakes
- Reduced braking from rear
Common Causes
- Rear brake pads at minimum thickness
- Wear sensor wire damaged
- Connector not reattached after service
Diagnostic Steps
- Check rear brake pad thickness
- Inspect wear sensor wire
- Check sensor connector
- Measure pad thickness
Repair Notes
Replace rear brake pads and wear sensors.
Related Codes
Other Chassis Codes
- C0021LF Wheel Speed Sensor Range/Performance
- C0022RF Wheel Speed Sensor Range/Performance
- C0023LR Wheel Speed Sensor Range/Performance
- C0024RR Wheel Speed Sensor Range/Performance
- C0025LF Wheel Speed Sensor Circuit Intermittent
- C0026RF Wheel Speed Sensor Circuit Intermittent
- C0027LR Wheel Speed Sensor Circuit Intermittent
- C0028RR Wheel Speed Sensor Circuit Intermittent
- C0035Left Front Wheel Speed Sensor Circuit
- C0036Left Front Wheel Speed Signal Erratic
C0131 on Other Vehicles
Rolls-Royce Cullinan
2019-2024 6.75L V12 Twin Turbo
Rolls-Royce Dawn
2016-2024 6.6L V12 Twin Turbo
Rolls-Royce Ghost
2010-2024 6.6L V12 Twin Turbo
Rolls-Royce Phantom VII
2003-2017 6.75L V12
Rolls-Royce Phantom VIII
2018-2024 6.75L V12 Twin Turbo
Rolls-Royce Silver Seraph
1998-2002 5.4L V12
Rolls-Royce Silver Spirit
1990-1998 6.75L V8
Rolls-Royce Silver Spur
1990-1998 6.75L V8
Common Questions
What does code C0131 mean on a 2000-2002 Rolls-Royce Corniche?
C0131 stands for "Brake Pad Wear Sensor Circuit Rear". The rear brake pad wear sensor indicates pads are worn or the circuit is faulty.
What are the symptoms of C0131 on a Rolls-Royce Corniche?
Common symptoms of C0131 include: Brake pad warning light, Service message for rear brakes, Reduced braking from rear.
What causes C0131 on a 2000-2002 Rolls-Royce Corniche?
Common causes of C0131 include: Rear brake pads at minimum thickness, Wear sensor wire damaged, Connector not reattached after service.