2007-2013 Acura MDX Long Block Replacement Torque Specs

3.7L V6

Applies to 2007, 2008, 2009, 2010, 2011, 2012, and 2013 Acura MDX

Labor Time:12 hours

Torque Values (40 specifications)

Component	Nm	lb-ft	Notes
⚠️ Camshaft Cap Bolts	14	10	Tighten in sequence from center outward, multiple passes
Camshaft Cap Bolts	14	10	Tighten in sequence from center outward, multiple passes
⚠️ Connecting Rod Bolts	45	33	TTY - critical torque plus angle
Connecting Rod Bolts	45	33	TTY - critical torque plus angle
Cover Bolts	16	12	—
Cover Bolts	16	12	—
⚠️ Cylinder Head Bolts	65	48	TTY - tighten in sequence plus angle
Cylinder Head Bolts	65	48	TTY - tighten in sequence plus angle
Electrical Connector Bolts	7	5	—
Electrical Connector Bolts	7	5	—
Exhaust Manifold Nuts	30	22	Apply anti-seize, work hot-to-cold
⚠️ Exhaust Manifold Nuts	30	22	Apply anti-seize, work hot-to-cold
⚠️ Flywheel Bolts	95	70	Often TTY, tighten in star pattern
Flywheel Bolts	95	70	Often TTY, tighten in star pattern
⚠️ Gasket Bolts	20	15	—
Gasket Bolts	20	15	—
Gasket Surface Bolts	20	15	Clean mating surfaces
⚠️ Gasket Surface Bolts	20	15	Clean mating surfaces
⚠️ Intake Manifold Bolts	25	18	—
Intake Manifold Bolts	25	18	—
Main Bearing Cap Bolts	75	55	TTY - tighten in sequence plus angle
⚠️ Main Bearing Cap Bolts	75	55	TTY - tighten in sequence plus angle
Mounting Bolts	47	35	—
⚠️ Mounting Bolts	47	35	—
⚠️ Oil Drain Plug	35	26	Use new crush washer
Oil Drain Plug	35	26	Use new crush washer
⚠️ Oil Pan Bolts	12	9	—
Oil Pan Bolts	12	9	—
Sensor Bolts	11	8	—
Sensor Bolts	11	8	—
Sensor Mounting Bolts	11	8	—
Sensor Mounting Bolts	11	8	—
⚠️ Timing Chain Tensioner Bolt	25	18	Install with pin/clip to compress
Timing Chain Tensioner Bolt	25	18	Install with pin/clip to compress
⚠️ Timing Cover Bolts - 8mm	25	18	Tighten in sequence
Timing Cover Bolts - 8mm	25	18	Tighten in sequence
Transmission-to-Engine Bolts	55	41	—
⚠️ Transmission-to-Engine Bolts	55	41	—
Valve Cover Bolts	10	7	Tighten in sequence
Valve Cover Bolts	10	7	Tighten in sequence

Other Jobs with Torque Specs

Common Questions

What is the torque spec for long block replacement on a 2007-2013 Acura MDX?

The primary torque specification for long block replacement on a 2007-2013 Acura MDX is 14 Nm (10 lb-ft). Note: Tighten in sequence from center outward, multiple passes

How many torque specs are there for Acura MDX long block replacement?

There are 40 torque specifications for long block replacement on the 2007-2013 Acura MDX 3.7L V6, covering all related fasteners and components.