2012-2012 Cadillac Escalade Short Block Replacement Torque Specs

6.2L V8

Labor Time:15 hours

Torque Values (28 specifications)

Component	Nm	lb-ft	Notes
Connecting Rod Bolts	45	33	TTY - critical torque plus angle
⚠️ Connecting Rod Bolts	45	33	TTY - critical torque plus angle
Cover Bolts	22	16	—
Cover Bolts	22	16	—
Crankshaft Pulley Bolt	180	133	Often TTY - check spec, may require impact
⚠️ Crankshaft Pulley Bolt	180	133	Often TTY - check spec, may require impact
Flywheel Bolts	95	70	Often TTY, tighten in star pattern
⚠️ Flywheel Bolts	95	70	Often TTY, tighten in star pattern
⚠️ Gasket Bolts	27	20	—
Gasket Bolts	27	20	—
Main Bearing Cap Bolts	75	55	TTY - tighten in sequence plus angle
⚠️ Main Bearing Cap Bolts	75	55	TTY - tighten in sequence plus angle
Mounting Bolts	64	47	—
Mounting Bolts	37	27	—
Mounting Bolts	37	27	—
⚠️ Mounting Bolts	64	47	—
⚠️ Oil Drain Plug	35	26	Use new crush washer
Oil Drain Plug	35	26	Use new crush washer
⚠️ Oil Pan Bolts	12	9	—
Oil Pan Bolts	12	9	—
Oil Pump Bolts	12	9	—
⚠️ Oil Pump Bolts	12	9	—
Sensor Bolts	15	11	—
Sensor Bolts	15	11	—
⚠️ Timing Cover Bolts - 8mm	25	18	Tighten in sequence
Timing Cover Bolts - 8mm	25	18	Tighten in sequence
Transmission-to-Engine Bolts	55	41	—
⚠️ Transmission-to-Engine Bolts	55	41	—

Other Jobs with Torque Specs

Common Questions

What is the torque spec for short block replacement on a 2012-2012 Cadillac Escalade?

The primary torque specification for short block replacement on a 2012-2012 Cadillac Escalade is 45 Nm (33 lb-ft). Note: TTY - critical torque plus angle

How many torque specs are there for Cadillac Escalade short block replacement?

There are 28 torque specifications for short block replacement on the 2012-2012 Cadillac Escalade 6.2L V8, covering all related fasteners and components.