2010-2016 Cadillac SRX U-Joint Torque Specs

3.0L V6

Applies to 2010, 2011, 2012, 2013, 2014, 2015, and 2016 Cadillac SRX

Labor Time:1 hours

Torque Values (20 specifications)

Component	Nm	lb-ft	Notes
⚠️ Axle Nut	256	189	Use new nut, stake after
Axle Nut	256	189	Use new nut, stake after
⚠️ CV Bolts	64	47	—
CV Bolts	64	47	—
⚠️ CV Joint Bolts	64	47	—
CV Joint Bolts	64	47	—
Cover Screws	11	8	—
Cover Screws	11	8	—
Differential Cover Bolts	35	26	Apply RTV sealant
⚠️ Differential Cover Bolts	35	26	Apply RTV sealant
Driveshaft Bolts	79	58	—
⚠️ Driveshaft Bolts	79	58	—
Driveshaft U-Joint Straps	20	15	Tighten evenly
⚠️ Driveshaft U-Joint Straps	20	15	Tighten evenly
Mounting Bolts	28	21	—
Mounting Bolts	28	21	—
⚠️ Wheel Lug Nuts	142	105	—
Wheel Lug Nuts	142	105	—
⚠️ Yoke Nut	150	111	If equipped
Yoke Nut	150	111	If equipped

The primary torque specification for u-joint on a 2010-2016 Cadillac SRX is 256 Nm (189 lb-ft). Note: Use new nut, stake after

There are 20 torque specifications for u-joint on the 2010-2016 Cadillac SRX 3.0L V6, covering all related fasteners and components.