2019-2024 Chevrolet Blazer Engine R&R Torque Specs

3.6L V6

Applies to 2019, 2020, 2021, 2022, 2023, and 2024 Chevrolet Blazer

Labor Time:10 hours

Torque Values (34 specifications)

Component	Nm	lb-ft	Notes
⚠️ AC Compressor Bolts	25	18	—
AC Compressor Bolts	25	18	—
⚠️ Alternator Mounting Bolts	50	37	—
Alternator Mounting Bolts	50	37	—
Cover Bolts	19	14	—
Cover Bolts	19	14	—
Electrical Connector Bolts	8	6	—
Electrical Connector Bolts	8	6	—
Engine Mount-to-Block Bolts	65	48	—
⚠️ Engine Mount-to-Block Bolts	65	48	—
Engine Mount-to-Frame Bolts	75	55	—
⚠️ Engine Mount-to-Frame Bolts	75	55	—
⚠️ Exhaust Manifold Nuts	30	22	Apply anti-seize, work hot-to-cold
Exhaust Manifold Nuts	30	22	Apply anti-seize, work hot-to-cold
⚠️ Flywheel Bolts	95	70	Often TTY, tighten in star pattern
Flywheel Bolts	95	70	Often TTY, tighten in star pattern
⚠️ Gasket Bolts	23	17	—
Gasket Bolts	23	17	—
⚠️ Gasket Surface Bolts	23	17	Clean mating surfaces
Gasket Surface Bolts	23	17	Clean mating surfaces
⚠️ Mounting Bolts	54	40	—
Mounting Bolts	54	40	—
Oil Drain Plug	35	26	Use new crush washer
⚠️ Oil Drain Plug	35	26	Use new crush washer
Power Steering Pump Bolts	25	18	—
⚠️ Power Steering Pump Bolts	25	18	—
Sensor Bolts	12	9	—
Sensor Bolts	12	9	—
Sensor Mounting Bolts	12	9	—
Sensor Mounting Bolts	12	9	—
⚠️ Starter Mounting Bolts	50	37	—
Starter Mounting Bolts	50	37	—
⚠️ Transmission-to-Engine Bolts	55	41	—
Transmission-to-Engine Bolts	55	41	—

The primary torque specification for engine r&r on a 2019-2024 Chevrolet Blazer is 25 Nm (18 lb-ft).

There are 34 torque specifications for engine r&r on the 2019-2024 Chevrolet Blazer 3.6L V6, covering all related fasteners and components.