2005-2010 Chrysler 300 Engine R&R Torque Specs

5.7L V8 HEMI

Applies to 2005, 2006, 2007, 2008, 2009, and 2010 Chrysler 300

Labor Time:10 hours

Torque Values (15 specifications)

Component	Nm	lb-ft	Notes
⚠️ AC Compressor Bolts	25	18	—
⚠️ Alternator Mounting Bolts	50	37	—
Cover Bolts	22	16	—
⚠️ Engine Mount-to-Block Bolts	65	48	—
⚠️ Engine Mount-to-Frame Bolts	75	55	—
⚠️ Exhaust Manifold Nuts	30	22	Apply anti-seize, work hot-to-cold
⚠️ Flywheel Bolts	95	70	Often TTY, tighten in star pattern
⚠️ Gasket Bolts	27	20	—
Mounting Bolts	37	27	—
⚠️ Mounting Bolts	64	47	—
⚠️ Oil Drain Plug	35	26	Use new crush washer
⚠️ Power Steering Pump Bolts	25	18	—
Sensor Bolts	15	11	—
⚠️ Starter Mounting Bolts	50	37	—
⚠️ Transmission-to-Engine Bolts	55	41	—

The primary torque specification for engine r&r on a 2005-2010 Chrysler 300 is 25 Nm (18 lb-ft).

There are 15 torque specifications for engine r&r on the 2005-2010 Chrysler 300 5.7L V8 HEMI, covering all related fasteners and components.