2001-2010 Chrysler Sebring Piston Rings - All Torque Specs

3.5L V6

Applies to 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, and 2010 Chrysler Sebring

Labor Time:20 hours

Torque Values (16 specifications)

Component	Nm	lb-ft	Notes
⚠️ Connecting Rod Bolts	45	33	TTY - critical torque plus angle
Cover Bolts	19	14	—
Cover Bolts	19	14	—
⚠️ Cylinder Head Bolts	65	48	TTY - tighten in sequence plus angle
Electrical Connector Bolts	8	6	—
⚠️ Gasket Bolts	23	17	—
⚠️ Gasket Surface Bolts	23	17	Clean mating surfaces
⚠️ Main Bearing Cap Bolts	75	55	TTY - tighten in sequence plus angle
Mounting Bolts	31	23	—
⚠️ Mounting Bolts	55	40	—
⚠️ Mounting Bolts	54	40	—
⚠️ Oil Drain Plug	35	26	Use new crush washer
⚠️ Oil Pan Bolts	12	9	Tighten in sequence
⚠️ Oil Pump Pickup Tube	12	9	—
Sensor Bolts	12	9	—
Sensor Mounting Bolts	12	9	—

The primary torque specification for piston rings - all on a 2001-2010 Chrysler Sebring is 45 Nm (33 lb-ft). Note: TTY - critical torque plus angle

There are 16 torque specifications for piston rings - all on the 2001-2010 Chrysler Sebring 3.5L V6, covering all related fasteners and components.