2007-2012 Dodge Caliber Intake Manifold Torque Specs

1.8L I4

Applies to 2007, 2008, 2009, 2010, 2011, and 2012 Dodge Caliber

Labor Time:3 hours

Torque Values (9 specifications)

Component	Nm	lb-ft	Notes
Cover Bolts	15	11	—
Electrical Connector Bolts	7	5	—
⚠️ Fuel Rail Bolts	12	9	⚠️ VERIFY SEQUENCE WITH SERVICE MANUAL
⚠️ Gasket Surface Bolts	19	14	Clean mating surfaces
⚠️ Intake Manifold Bolts	25	18	Tighten in sequence from center out \| ⚠️ VERIFY SEQUENCE WITH SERVICE MANUAL
⚠️ Mounting Bolts	45	33	—
⚠️ PCV Valve	8	6	⚠️ VERIFY SEQUENCE WITH SERVICE MANUAL
Sensor Mounting Bolts	11	8	—
⚠️ Throttle Body Bolts	10	7	⚠️ VERIFY SEQUENCE WITH SERVICE MANUAL

The primary torque specification for intake manifold on a 2007-2012 Dodge Caliber is 15 Nm (11 lb-ft).

There are 9 torque specifications for intake manifold on the 2007-2012 Dodge Caliber 1.8L I4, covering all related fasteners and components.