Engine Mount - Rear Torque Specifications

2007-2012 Dodge Caliber 2.4L I4

Labor Time:1.5 hours

Torque Values (10 specifications)

Component	Nm	lb-ft	Notes
Cover Bolts	16	12	—
Electrical Connector Bolts	7	5	—
⚠️ Engine Mount-to-Block Bolts	65	48	—
⚠️ Engine Mount-to-Frame Bolts	75	55	—
⚠️ Gasket Surface Bolts	20	15	Clean mating surfaces
⚠️ Mount Through Bolt	88	65	—
⚠️ Mount-to-Frame Bolts	61	45	—
⚠️ Mounting Bolts	47	35	—
Sensor Bolts	11	8	—
Sensor Mounting Bolts	11	8	—

The primary torque specification for engine mount - rear on a 2007-2012 Dodge Caliber is 16 Nm (12 lb-ft).

There are 10 torque specifications for engine mount - rear on the 2007-2012 Dodge Caliber 2.4L I4, covering all related fasteners and components.