2008-2014 Dodge Challenger Driveshaft Torque Specs

3.6L V6 Pentastar

Applies to 2008, 2009, 2010, 2011, 2012, 2013, and 2014 Dodge Challenger

Labor Time:1.5 hours

Torque Values (13 specifications)

Component	Nm	lb-ft	Notes
⚠️ Axle Nut	281	207	—
⚠️ Axle Nut	281	207	Use new nut, stake after
⚠️ CV Bolts	70	52	—
⚠️ CV Joint Bolts	71	52	—
Cover Screws	12	9	—
⚠️ Differential Cover Bolts	39	29	Apply RTV sealant
⚠️ Differential Yoke Pinion Nut	200	148	Mark position before removal
⚠️ Driveshaft Bolts	85	63	—
Driveshaft Center Support	35	26	—
⚠️ Driveshaft U-Joint Straps	20	15	Tighten evenly
Mounting Bolts	31	23	—
⚠️ Wheel Lug Nuts	156	115	—
⚠️ Wheel Lug Nuts	156	115	—

The primary torque specification for driveshaft on a 2008-2014 Dodge Challenger is 281 Nm (207 lb-ft).

There are 13 torque specifications for driveshaft on the 2008-2014 Dodge Challenger 3.6L V6 Pentastar, covering all related fasteners and components.