2006-2010 Dodge Charger Engine Rebuild Torque Specs

2.7L V6

Applies to 2006, 2007, 2008, 2009, and 2010 Dodge Charger

Labor Time:25 hours

Torque Values (46 specifications)

Component	Nm	lb-ft	Notes
⚠️ Balance Shaft Bolts	25	18	—
Balance Shaft Bolts	25	18	—
⚠️ Camshaft Bearing Cap Bolts	14	10	Tighten in sequence, 3 passes
Camshaft Bearing Cap Bolts	14	10	Tighten in sequence, 3 passes
Camshaft Cap Bolts	14	10	Tighten in sequence from center outward, multiple passes
⚠️ Camshaft Cap Bolts	14	10	Tighten in sequence from center outward, multiple passes
⚠️ Connecting Rod Bolts	45	33	TTY - critical torque plus angle
Connecting Rod Bolts	45	33	TTY - critical torque plus angle
Cover Bolts	17	13	—
Cover Bolts	17	13	—
Crankshaft Pulley Bolt	180	133	Often TTY - check spec, may require impact
⚠️ Crankshaft Pulley Bolt	180	133	Often TTY - check spec, may require impact
Cylinder Head Bolts	65	48	TTY - tighten in sequence plus angle
⚠️ Cylinder Head Bolts	65	48	TTY - tighten in sequence plus angle
Exhaust Manifold Nuts	30	22	Apply anti-seize, work hot-to-cold
⚠️ Exhaust Manifold Nuts	30	22	Apply anti-seize, work hot-to-cold
Flywheel Bolts	95	70	Often TTY, tighten in star pattern
⚠️ Flywheel Bolts	95	70	Often TTY, tighten in star pattern
Gasket Bolts	21	16	—
⚠️ Gasket Bolts	21	16	—
⚠️ Intake Manifold Bolts	25	18	—
Intake Manifold Bolts	25	18	—
Main Bearing Cap Bolts	75	55	TTY - tighten in sequence plus angle
⚠️ Main Bearing Cap Bolts	75	55	TTY - tighten in sequence plus angle
⚠️ Mounting Bolts	50	37	—
Mounting Bolts	50	37	—
Mounting Bolts	28	21	—
Mounting Bolts	28	21	—
Oil Drain Plug	35	26	Use new crush washer
⚠️ Oil Drain Plug	35	26	Use new crush washer
⚠️ Oil Pan Bolts	12	9	Tighten in sequence
Oil Pan Bolts	12	9	Tighten in sequence
Oil Pump Bolts	12	9	—
⚠️ Oil Pump Bolts	12	9	—
Oil Pump Pickup Tube	12	9	—
⚠️ Oil Pump Pickup Tube	12	9	—
Sensor Bolts	11	8	—
Sensor Bolts	11	8	—
Timing Chain Guide Bolts	12	9	Replace if worn
⚠️ Timing Chain Guide Bolts	12	9	Replace if worn
⚠️ Timing Chain Tensioner Bolt	25	18	Install with pin/clip to compress
Timing Chain Tensioner Bolt	25	18	Install with pin/clip to compress
Timing Cover Bolts - 8mm	25	18	Tighten in sequence
⚠️ Timing Cover Bolts - 8mm	25	18	Tighten in sequence
Valve Cover Bolts	10	7	Tighten in sequence
Valve Cover Bolts	10	7	Tighten in sequence

Other Jobs with Torque Specs

Common Questions

What is the torque spec for engine rebuild on a 2006-2010 Dodge Charger?

The primary torque specification for engine rebuild on a 2006-2010 Dodge Charger is 25 Nm (18 lb-ft).

How many torque specs are there for Dodge Charger engine rebuild?

There are 46 torque specifications for engine rebuild on the 2006-2010 Dodge Charger 2.7L V6, covering all related fasteners and components.