Steering Angle Sensor Torque Specifications

2006-2010 Dodge Charger 3.5L V6

Labor Time:1 hours

Torque Values (16 specifications)

Component	Nm	lb-ft	Notes
Cover Screws	12	9	—
Cover Screws	12	9	—
Mounting Bolts	31	23	—
Mounting Bolts	31	23	—
Power Steering Line Fittings	30	22	Use new O-rings \| ⚠️ VERIFY SEQUENCE WITH SERVICE MANUAL
⚠️ Power Steering Line Fittings	30	22	Use new O-rings \| ⚠️ VERIFY SEQUENCE WITH SERVICE MANUAL
Rack Bolts	117	86	—
⚠️ Rack Bolts	117	86	—
Steering Rack Bolts	100	74	⚠️ VERIFY SEQUENCE WITH SERVICE MANUAL
⚠️ Steering Rack Bolts	100	74	⚠️ VERIFY SEQUENCE WITH SERVICE MANUAL
Tie Rod End Castle Nut	55	41	Use new cotter pin \| ⚠️ VERIFY SEQUENCE WITH SERVICE MANUAL
⚠️ Tie Rod End Castle Nut	55	41	Use new cotter pin \| ⚠️ VERIFY SEQUENCE WITH SERVICE MANUAL
⚠️ Tie Rod Nut	62	46	—
Tie Rod Nut	62	46	—
Wheel Lug Nuts	156	115	—
⚠️ Wheel Lug Nuts	156	115	—

The primary torque specification for steering angle sensor on a 2006-2010 Dodge Charger is 12 Nm (9 lb-ft).

There are 16 torque specifications for steering angle sensor on the 2006-2010 Dodge Charger 3.5L V6, covering all related fasteners and components.