2004-2009 Dodge Durango Front Main Seal Torque Specs

3.7L V6

Applies to 2004, 2005, 2006, 2007, 2008, and 2009 Dodge Durango

Labor Time:4 hours

Torque Values (22 specifications)

Component	Nm	lb-ft	Notes
Cover Bolts	16	12	—
Cover Bolts	16	12	—
⚠️ Crankshaft Pulley Bolt	180	133	Often TTY - check spec, may require impact
Crankshaft Pulley Bolt	180	133	Often TTY - check spec, may require impact
⚠️ Gasket Bolts	20	15	—
Gasket Bolts	20	15	—
⚠️ Harmonic Balancer Bolt	180	133	Often TTY, may need impact
Harmonic Balancer Bolt	180	133	Often TTY, may need impact
Mounting Bolts	27	20	—
Mounting Bolts	47	35	—
Mounting Bolts	27	20	—
⚠️ Mounting Bolts	47	35	—
Oil Drain Plug	35	26	Use new crush washer
⚠️ Oil Drain Plug	35	26	Use new crush washer
Oil Pan Bolts	12	9	Front section only
Oil Pan Bolts	12	9	Front section only
Sensor Bolts	11	8	—
Sensor Bolts	11	8	—
⚠️ Timing Cover Bolts - 10mm	45	33	Tighten in sequence
Timing Cover Bolts - 10mm	45	33	Tighten in sequence
⚠️ Timing Cover Bolts - 8mm	25	18	Tighten in sequence
Timing Cover Bolts - 8mm	25	18	Tighten in sequence

The primary torque specification for front main seal on a 2004-2009 Dodge Durango is 16 Nm (12 lb-ft).

There are 22 torque specifications for front main seal on the 2004-2009 Dodge Durango 3.7L V6, covering all related fasteners and components.