1998-2004 Dodge Intrepid Valve Job - Complete Torque Specs

2.7L V6

Applies to 1998, 1999, 2000, 2001, 2002, 2003, and 2004 Dodge Intrepid

Labor Time:10 hours

Torque Values (19 specifications)

Component	Nm	lb-ft	Notes
⚠️ Camshaft Cap Bolts	14	10	Tighten in sequence from center outward, multiple passes
⚠️ Camshaft Sprocket Bolt	80	59	Hold cam with wrench on hex
Cover Bolts	17	13	—
Cover Bolts	18	13	—
⚠️ Cylinder Head Bolts	65	48	TTY - tighten in sequence plus angle
Electrical Connector Bolts	7	5	—
⚠️ Exhaust Manifold Nuts	30	22	Apply anti-seize, work hot-to-cold
⚠️ Gasket Bolts	21	16	—
⚠️ Gasket Surface Bolts	22	16	Clean mating surfaces
⚠️ Intake Manifold Bolts	25	18	—
Mounting Bolts	28	21	—
⚠️ Mounting Bolts	50	37	—
⚠️ Mounting Bolts	50	37	—
⚠️ Rocker Arm Bolts	30	22	Tighten with cam lobe pointing away
Sensor Bolts	11	8	—
Sensor Mounting Bolts	11	8	—
⚠️ Timing Chain Tensioner Bolt	25	18	Install with pin/clip to compress
⚠️ Timing Cover Bolts - 8mm	25	18	Tighten in sequence
Valve Cover Bolts	10	7	Tighten in sequence

Other Jobs with Torque Specs

Common Questions

What is the torque spec for valve job - complete on a 1998-2004 Dodge Intrepid?

The primary torque specification for valve job - complete on a 1998-2004 Dodge Intrepid is 14 Nm (10 lb-ft). Note: Tighten in sequence from center outward, multiple passes

How many torque specs are there for Dodge Intrepid valve job - complete?

There are 19 torque specifications for valve job - complete on the 1998-2004 Dodge Intrepid 2.7L V6, covering all related fasteners and components.