2010-2010 Dodge Nitro Blower Motor Control Module Torque Specs

3.7L V6

Labor Time:1 hours

Torque Values (9 specifications)

Component	Nm	lb-ft	Notes
Battery Terminal Bolts	6	4	Do not overtighten
Cover Screws	11	8	—
⚠️ Ground Bolt	14	10	—
Ground Strap Bolts	12	9	Ensure clean contact
Module Mounting Bolts	8	6	—
Mounting Bolts	27	20	—
⚠️ Mounting Bolts	34	25	—
Sensor Mounting Bolts	10	7	—
⚠️ Terminal Bolts	7	5	—

Other Jobs with Torque Specs

4WD Actuator
ABS Module
ABS Pump
ABS Tone Ring
ABS Wheel Speed Sensor - Front
ABS Wheel Speed Sensor - Rear
AC Accumulator
AC Clutch Coil

Common Questions

What is the torque spec for blower motor control module on a 2010-2010 Dodge Nitro?

The primary torque specification for blower motor control module on a 2010-2010 Dodge Nitro is 6 Nm (4 lb-ft). Note: Do not overtighten

How many torque specs are there for Dodge Nitro blower motor control module?

There are 9 torque specifications for blower motor control module on the 2010-2010 Dodge Nitro 3.7L V6, covering all related fasteners and components.