1990-1996 Ford E-150 Steering Angle Sensor Torque Specs

4.9L I6 300

Applies to 1990, 1991, 1992, 1993, 1994, 1995, and 1996 Ford E-150

Labor Time:1 hours

Torque Values (8 specifications)

Component	Nm	lb-ft	Notes
Cover Screws	11	8	—
Mounting Bolts	27	20	—
⚠️ Power Steering Line Fittings	30	22	Use new O-rings \| ⚠️ VERIFY SEQUENCE WITH SERVICE MANUAL
⚠️ Rack Bolts	102	75	—
⚠️ Steering Rack Bolts	100	74	⚠️ VERIFY SEQUENCE WITH SERVICE MANUAL
⚠️ Tie Rod End Castle Nut	55	41	Use new cotter pin \| ⚠️ VERIFY SEQUENCE WITH SERVICE MANUAL
⚠️ Tie Rod Nut	54	40	—
⚠️ Wheel Lug Nuts	136	100	—

The primary torque specification for steering angle sensor on a 1990-1996 Ford E-150 is 11 Nm (8 lb-ft).

There are 8 torque specifications for steering angle sensor on the 1990-1996 Ford E-150 4.9L I6 300, covering all related fasteners and components.