2006-2010 Ford Explorer Timing Chain Kit Torque Specs

4.6L V8

Applies to 2006, 2007, 2008, 2009, and 2010 Ford Explorer

Labor Time:10.3 hours

Torque Values (45 specifications)

Component	Nm	lb-ft	Notes
⚠️ Cam Phaser Bolt	65	48	Apply threadlocker, hold cam stationary
Cam Phaser Bolt	65	48	Apply threadlocker, hold cam stationary
Cam Phaser Bolt	65	48	Apply threadlocker, hold cam stationary
Camshaft Sprocket Bolt	80	59	Hold cam with wrench on hex
⚠️ Camshaft Sprocket Bolt	80	59	Hold cam with wrench on hex
Camshaft Sprocket Bolt	80	59	Hold cam with wrench on hex
⚠️ Crankshaft Pulley Bolt	180	133	Often TTY - check spec, may require impact
Crankshaft Pulley Bolt	180	133	Often TTY - check spec, may require impact
Crankshaft Pulley Bolt	180	133	Often TTY - check spec, may require impact
Guide Bolts	31	23	—
Guide Bolts	31	23	—
⚠️ Guide Bolts	31	23	—
Oil Drain Plug	35	26	Use new crush washer
Oil Drain Plug	35	26	Use new crush washer
⚠️ Oil Drain Plug	35	26	Use new crush washer
⚠️ Oil Pump Bolts	12	9	—
Oil Pump Bolts	12	9	—
Oil Pump Bolts	12	9	—
Tensioner Bolt	25	19	—
Tensioner Bolt	25	19	—
⚠️ Tensioner Bolt	25	19	—
⚠️ Timing Chain Guide Bolts	12	9	Replace if worn
Timing Chain Guide Bolts	12	9	Replace if worn
Timing Chain Guide Bolts	12	9	Replace if worn
Timing Chain Idler Sprocket	25	18	—
⚠️ Timing Chain Idler Sprocket	25	18	—
Timing Chain Idler Sprocket	25	18	—
⚠️ Timing Chain Tensioner Bolt	25	18	Install with pin/clip to compress
Timing Chain Tensioner Bolt	25	18	Install with pin/clip to compress
Timing Chain Tensioner Bolt	25	18	Install with pin/clip to compress
⚠️ Timing Cover Bolts	17	13	—
Timing Cover Bolts	17	13	—
Timing Cover Bolts	17	13	—
Timing Cover Bolts - 10mm	45	33	Tighten in sequence
⚠️ Timing Cover Bolts - 10mm	45	33	Tighten in sequence
Timing Cover Bolts - 10mm	45	33	Tighten in sequence
Timing Cover Bolts - 6mm	10	7	Tighten in sequence
Timing Cover Bolts - 6mm	10	7	Tighten in sequence
Timing Cover Bolts - 6mm	10	7	Tighten in sequence
Timing Cover Bolts - 8mm	25	18	Tighten in sequence
Timing Cover Bolts - 8mm	25	18	Tighten in sequence
⚠️ Timing Cover Bolts - 8mm	25	18	Tighten in sequence
Valve Cover Bolts	10	7	Tighten in sequence
Valve Cover Bolts	10	7	Tighten in sequence
Valve Cover Bolts	10	7	Tighten in sequence

Other Jobs with Torque Specs

Common Questions

What is the torque spec for timing chain kit on a 2006-2010 Ford Explorer?

The primary torque specification for timing chain kit on a 2006-2010 Ford Explorer is 65 Nm (48 lb-ft). Note: Apply threadlocker, hold cam stationary

How many torque specs are there for Ford Explorer timing chain kit?

There are 45 torque specifications for timing chain kit on the 2006-2010 Ford Explorer 4.6L V8, covering all related fasteners and components.