2016-2019 Ford Explorer Variable Valve Timing Actuator Torque Specs

3.5L V6

Applies to 2016, 2017, 2018, and 2019 Ford Explorer

Labor Time:3.4 hours

Torque Values (28 specifications)

Component	Nm	lb-ft	Notes
⚠️ Cam Phaser Bolt	65	48	Apply threadlocker, hold cam stationary
Cam Phaser Bolt	65	48	Apply threadlocker, hold cam stationary
⚠️ Camshaft Sprocket Bolt	80	59	Hold cam with wrench on hex
Camshaft Sprocket Bolt	80	59	Hold cam with wrench on hex
Cover Bolts	19	14	—
Cover Bolts	19	14	—
⚠️ Crankshaft Pulley Bolt	180	133	Often TTY - check spec, may require impact
Crankshaft Pulley Bolt	180	133	Often TTY - check spec, may require impact
Electrical Connector Bolts	8	6	—
Electrical Connector Bolts	8	6	—
Gasket Bolts	23	17	—
⚠️ Gasket Bolts	23	17	—
⚠️ Gasket Surface Bolts	23	17	Clean mating surfaces
Gasket Surface Bolts	23	17	Clean mating surfaces
⚠️ Mounting Bolts	54	40	—
Mounting Bolts	54	40	—
Sensor Bolts	12	9	—
Sensor Bolts	12	9	—
Sensor Mounting Bolts	12	9	—
Sensor Mounting Bolts	12	9	—
Timing Chain Tensioner Bolt	25	18	Install with pin/clip to compress
⚠️ Timing Chain Tensioner Bolt	25	18	Install with pin/clip to compress
Timing Cover Bolts - 8mm	25	18	Tighten in sequence
⚠️ Timing Cover Bolts - 8mm	25	18	Tighten in sequence
VVT Solenoid Bolt	10	7	—
VVT Solenoid Bolt	10	7	—
Valve Cover Bolts	10	7	Tighten in sequence
Valve Cover Bolts	10	7	Tighten in sequence

Other Jobs with Torque Specs

Common Questions

What is the torque spec for variable valve timing actuator on a 2016-2019 Ford Explorer?

The primary torque specification for variable valve timing actuator on a 2016-2019 Ford Explorer is 65 Nm (48 lb-ft). Note: Apply threadlocker, hold cam stationary

How many torque specs are there for Ford Explorer variable valve timing actuator?

There are 28 torque specifications for variable valve timing actuator on the 2016-2019 Ford Explorer 3.5L V6, covering all related fasteners and components.