ShopBaseFree forever shop management software for auto repair shops
Try ShopBase Free →
Home/Torque Specs/Ford/Focus/2008-2011 2.0L I4 Duratec/Timing Chain
🇨🇦Canada

2008-2011 Ford Focus Timing Chain Torque Specs

2.0L I4 Duratec

Applies to 2008, 2009, 2010, and 2011 Ford Focus

Labor Time:8 hours
View Labor Time Details

Torque Values (20 specifications)

ComponentNmlb-ftNotes
6548Apply threadlocker, hold cam stationary | ⚠️ VERIFY SEQUENCE WITH SERVICE MANUAL
1410Tighten in sequence, 3 passes | ⚠️ VERIFY SEQUENCE WITH SERVICE MANUAL
1410Tighten in sequence from center outward, multiple passes | ⚠️ VERIFY SEQUENCE WITH SERVICE MANUAL
107⚠️ VERIFY SEQUENCE WITH SERVICE MANUAL
8059Hold cam with wrench on hex | ⚠️ VERIFY SEQUENCE WITH SERVICE MANUAL
107⚠️ VERIFY SEQUENCE WITH SERVICE MANUAL
180133Often TTY - check spec, may require impact | ⚠️ VERIFY SEQUENCE WITH SERVICE MANUAL
2418—
3526Use new crush washer | ⚠️ VERIFY SEQUENCE WITH SERVICE MANUAL
129⚠️ VERIFY SEQUENCE WITH SERVICE MANUAL
2015—
129Replace if worn | ⚠️ VERIFY SEQUENCE WITH SERVICE MANUAL
2518⚠️ VERIFY SEQUENCE WITH SERVICE MANUAL
2518Install with pin/clip to compress | ⚠️ VERIFY SEQUENCE WITH SERVICE MANUAL
1410—
4533Tighten in sequence | ⚠️ VERIFY SEQUENCE WITH SERVICE MANUAL
107Tighten in sequence | ⚠️ VERIFY SEQUENCE WITH SERVICE MANUAL
2518Tighten in sequence | ⚠️ VERIFY SEQUENCE WITH SERVICE MANUAL
107⚠️ VERIFY SEQUENCE WITH SERVICE MANUAL
107Tighten in sequence | ⚠️ VERIFY SEQUENCE WITH SERVICE MANUAL

Other Jobs with Torque Specs

Common Questions

What is the torque spec for timing chain on a 2008-2011 Ford Focus?

The primary torque specification for timing chain on a 2008-2011 Ford Focus is 65 Nm (48 lb-ft). Note: Apply threadlocker, hold cam stationary | ⚠️ VERIFY SEQUENCE WITH SERVICE MANUAL

How many torque specs are there for Ford Focus timing chain?

There are 20 torque specifications for timing chain on the 2008-2011 Ford Focus 2.0L I4 Duratec, covering all related fasteners and components.